tesa® 64007

Tamper Evident Carton Sealing Tape

Product Features

It helps to reduce pilferage during transport and storage of carton boxes.

Product description

tesa® 64007 is a tamper evident providing carton sealing tape.
tesa® 64007 is designed to avoid unnoticed opening and reclosure of carton boxes.

The tamper evident effect works in two steps:

When tesa® 64007 is removed from the box, the product leaves the message “OPENED” in different languages on the carton.
The tamper evident message “OPENED” remains clearly visible also after re-closure of the box.

The tamper evident effect may also be achieved through a complete carton fibre tear-out, which makes a re-closure impossible.

It can be used as a normal carton sealing tape on dispensers and machines with a brake.

Available Colours: yellow, blue

Product details and specifications

Product Features

It helps to reduce pilferage during transport and storage of carton boxes.

Application Fields

These characteristic makes tesa® 64007 especially suitable for the closure of cartons with valuable or confidential content as:

Electronic products
High value / branded clothing
Tobacco products
Documents

Adhesive Type	water-based acrylic
Backing material	BOPP
Total thickness	62 µm

Adhesive Type	water-based acrylic
Backing material	BOPP
Total thickness	62 µm

Elongation at break	150 %
Tensile strength	42 N/cm
Manual application	yes
Automatic application	yes

Elongation at break	150 %
Tensile strength	42 N/cm
Manual application	yes
Automatic application	yes

Adhesion to Steel	2.8 N/cm

Adhesion to Steel	2.8 N/cm

It has to be pointed out that on very lower carton qualities the adhesion should be tested and that the tamper evident effect (legible message or fibre tear) cannot be guaranteed.

Value "adhesion/steel": no parameter of the specification, not measurable.

Please note "total thickness" for blue coloured tape is 66µm.

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads

Download the files below for more technical details and information on this product.

Product information_tesa® 64007_en 63.5 kB

Contact us

Thank you for your message

We'll get back to you as soon as possible.

Best regards

Your tesa Team

Something went wrong. Please try again later.

Product comparison

Name of product	tesa® 64007	tesa® 60418	tesa® 4120 hand	tesa® 60412	tesa® 4100 tesapack Comfort	tesa® 4267 PV2	tesa® 4011	tesa® 4012	tesa® 4008	tesa® 4256 NR	tesa® 4267 PV0
Total thickness	62 µm	36 µm	49 µm	56 µm	65 µm		52 µm	65 µm	45 µm	47 µm
Adhesive Type	water-based acrylic	synthetic rubber	natural rubber	water-based acrylic	natural rubber		water-based acrylic	water-based acrylic	water-based acrylic	natural rubber
Backing material	BOPP	PET	PVC film	PET	PVC film		BOPP	BOPP	BOPP	BOPP
Automatic application	yes	yes	yes	no	yes		yes	yes	yes	yes
Hand tearability		no	very good	low
Printability		no
Packaging Weight		Up to 25 kg	Up to 25 kg	Up to 30 kg