tesa® 50988

Adhesive Tabbing Tape

Product Features

Transparent for an easy and secure positioning
High stiffness for good workability

Product description

tesa® 50988 is a transparent tabbing tape featuring a PET backing with a synthetic rubber adhesive that is used for removing film liner of tesa® ACX^plus assortments.

Product details and specifications

Product Features

Transparent for an easy and secure positioning
High stiffness for good workability

Application Fields

For straight tabbing applications, commonly used for bridging to remove the liner from several pieces of tape and/or die cuts in just one operation

Adhesive Type	synthetic rubber
Backing material	PET film
Color	transparent
Total thickness	200 µm

Adhesive Type	synthetic rubber
Backing material	PET film
Color	transparent
Total thickness	200 µm

Elongation at break	75 %
Tensile strength	100 N/cm

Elongation at break	75 %
Tensile strength	100 N/cm

Suitable solution as manual tabbing tape application of ACX^plus 78xx PV29, ACX^plus 745xx PV29 and ACX^plus 771xx PV28. Application guide:

Apply with 20 N/cm at 15°C to 40°C preventing air entrapment
Recommended dwelling time is 30 minutes before use
Best performance is achieved by starting tabbing/ liner removal at a very fast speed of about 2 m/s and at an angle less than 45° between liner and tape.

For more details please refer to "Tips and Tricks for tesa ACX^plus Tabbing."

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads

Download the files below for more technical details and information on this product.

Product information_tesa® 50988_en 64.5 kB

Contact us

Thank you for your message

We'll get back to you as soon as possible.

Best regards

Your tesa Team

Something went wrong. Please try again later.

Product comparison

Name of product	tesa® 50988	tesa® 54999 PV1	tesa® ACXplus 7805 Black Line	tesa® 66022 Ultra Low VOC	tesa® ACXplus 79011	tesa® 52215	tesa® ACXplus 7811 Black Line	tesa® ACXplus 7815 Black Line	tesa® ACXplus 7812 Black Line	tesa® 77811 Primerless Line	tesa® 77216 Base Line
Total thickness	200 µm	150 µm	500 µm		1100 µm	150 µm	1100 µm	1500 µm	1200 µm	1100 µm	1600 µm
Adhesive Type	synthetic rubber	silicone based	modified acrylic	water-based acrylic	LSE	water-based acrylic	modified acrylic	modified acrylic	modified acrylic	LSE	none
Backing material	PET film	PET film	foamed acrylic	none	Acrylic foam	non-woven	foamed acrylic	foamed acrylic	foamed acrylic	Acrylic foam	foamed acrylic
Color	transparent	green	deep black	transparent	gray	translucent	deep black	deep black	deep black	gray	gray