01
We need: boards or placemats made of cork, cutter, fox template, ruler, set square, pencil, cutting mat, brush, metallic silver varnish, masking tape, Powerstrips®
DIY Fox Pinboard
DIY Fox Pinboard
Clever heads pin everything they need to remember on this cork board. Featuring: None other than the clever fox - graphically enhanced.
We need:
- boards or placemats made of cork
- cutter
- fox template
- ruler, set square
- pencil
- cutting mat
- brush
- metallic silver varnish
- masking tape
- Powerstrips®
How it's done:
tesa SE
Overview of materials needed for a diy fox pinboard
02
Transfer the fox templates on the cork using a pencil.
tesa SE
Transfer the fox template
03
Cut out the outlines with the cutter.
tesa SE
Cut out the shapes
04
Mask the different areas you wish to paint, using masking tape.
tesa SE
Mask the different areas
05
Paint the areas with the silver varnish.
tesa SE
Paint the masked areas
06
Remove the masking tape.
tesa SE
Carfully remove the masking tape
07
Peel-off Powerstrips® from the sheet.
tesa SE
Peel-off the Powerstrips®
08
Apply the Powerstrips® on the backside of the cork elements and press firmly for at least five seconds. Do not press on the latch.
tesa SE
Apply the Powerstrips® on the backside
09
Now remove the second protective film.
tesa SE
Remove the second protective film
10
Firmly press the cork elements - like specified on the template - in the desired position on the previously cleaned wall for at least five seconds.
tesa SE
Firmly press the cork elements on the wall
11
Organize your office with this stylish fox pinboard!
