Beautifully mounting a bathroom mirror without drilling A mirror is simply indispensable in the bathroom, and there are many gorgeous mirrors you can choose from. But you can also put them up without needing a drill, keeping your walls safe and sound, thanks to the tesa® adhesive screws.
Thoroughly clean the intended spot for the screws with a cloth with pure alcohol or water. Make sure to eliminate all grease or dust.
Measure out with the mirror where to place the screws. Peel the protective film off the first adhesive screw.
Place it on the wall. It will stick to it, so you can safely proceed to the next step.
Squeeze adhesive from the provided tube into the larger hole until the adhesive starts exiting the smaller hole. Repeat for the second screw.
Give the adhesive 12 hours to dry and develop its full strength.
Add the decorative caps to the screws, letting them shine.
Attach the mirror to the screws securely. The hold is perfect and reliable.
With the mirror in place, you can enjoy its reflection every day. That’s the right way to start the day!
But it’s also no problem at all to take the mirror and screws off again. Detach the mirror first, then use pliers to twist the screws sideways off the wall.
With a scraper, you can remove the remaining adhesive so that your tiles look just as they did before.
