01
Collect all items and let's start!
IMAGE – 410.9 kB
Just Married Car Decoration
While the guests are still partying, the bridal couple starts into their honeymoon. Of course, in a vintage car stylishly embellished with this wedding car decoration. The simple car decoration for marriage will let everybody know that you just got married.
We need:
- Printed templates for the garland
- scissors
- hole punch
- 3 x white photo cardboard DIN A4
- golden ribbon (5 mm wide – length depends on the width of the car)
- tesa Easy Cover® Premium M
- tesa® Spray glue PERMANENT
- tesa Powerstrips® DECO Hooks SMALL
- tesa Easy Cut® Desk dispenser Compact
- tesafilm® crystal clear
This is how we do it:
Step 1
02
Mask off the working surface with tesa Easy Cover®. Coat the templates on the backside with spray glue, and then glue them onto the photo carton. Allow to dry.
Step 2
03
Cut out the single pennants.
Step 3
04
Punch a hole in the center of the upper part of each pennant.
Step 4
05
Thread the golden ribbon through the holes. Arrange at an even distance, according to the desired (car) width. Fix the ribbon on the backside using tesafilm®.
Step 5
06
Clean the desired spot on the car. Peel-off a Powerstrip for the DECO Hook from the sheet …
Step 6
07
… and place it on the desired spot on the car. Press on firmly for 5 seconds.
Step 7
08
Remove the protective film.
Step 8
09
Place the hook on the Powerstrip, and press firmly for at least five seconds. Repeat on the other side.
Step 9
10
Carefully attach the garland to the hook.
Step 10
Downloads:
Related products
- Protects against paint splashes
- Enables sharp and clean paint edges, even on slight curves
- With practical dispenser and integrated cutter
- Easy to cut to size
- Adapts ideally to protecting area
- Film structure slows paint-drops down The tesa® Eas
tesa® 60021 Spray glue Permanent
tesa Easy Cut® Desk dispenser Compact
tesafilm® crystal clear