01
Thoroughly remove all dust and grease from the surface. Make sure to use a cloth with water or pure alcohol.
Adhesive screw for up to 2.5kg. Ideal for objects where mounting is visible. For rough and solid surfaces like brick and stone.
Decorative lamp - mounting without drilling
Decorative lamp - mounting without drilling
Beautiful and unusual lamp hung on the wall Light doesn’t always have to come from the same old kinds of lamps. You can also hang a decorative lamp on a pulley system, providing a unique look that will draw approving glances. Moreover, you can attach the lamp without drilling.
We need:
- 1 tesa® Adhesive Screw Round 2.5kg (77903)
- Screw-on knob
- Decorative lamp to be hung on knob
This how we do it:
Step 1
02
Remove the protective film from the adhesive screw.
Step 2
03
Stick the screw on the intended spot. It will stay easily in place for the next step.
Step 3
04
Using the provided tube, squeeze adhesive into the larger hole. Stop once the adhesive starts coming out the smaller hole.
Step 4
05
Allow 12 hours for the adhesive to set and reach its full potential.
Step 5
06
Place the decorative cap on the screw, adding a beautiful shine to the arrangement with the lamp.
Step 6
07
Add a screw nut to the adhesive screw. This will help keep the lamp in its spot.
Step 7
08
Hang the lamp with its pulley system on the screw. Secure it by fastening the knob before it.
Step 8
09
Now you have a beautiful light source that is absolutely unique and gorgeous.
Step 9
10
Removing the screw requires no effort at all. After detaching lamp and knob, use pliers to twist the screw sideways to take it off.
Step 10
11
Finally, scrape off what adhesive remains. The wall is untouched, as if the lamp had never been mounted there.
Step 11
Related products