01
Use a cloth with pure alcohol or water to thoroughly clean the surface for the screws. Only without grease or dust can the adhesive develop its full strength.
Decorative ladder - mounting without drilling
A decorative ladder to keep your towels on – no drilling needed There are many ways to store towels or other bathroom items. Few of them look as nice as a wooden ladder leaning against the wall, adding a touch of lightness. Of course, with the tesa® adhesive screws, the ladder is actually firmly attached – without any damage to walls or tiles.
This is how we do it:
Step 1
02
Determine with the ladder where to position the screws. Remove the protective film from the first screw.
Step 2
03
Attach the screw to the wall in its proper place. It will stay on the wall.
Step 3
04
You can now squeeze the adhesive into the larger hole with the provided tube. Stop once the adhesive becomes visible in the smaller hole. Repeat for the second screw.
Step 4
05
Wait 12 hours for the adhesive to set and reach its full strength.
Step 5
06
Add the decorative caps to the screws. They will provide a beautiful counterpart to the ladder.
Step 6
07
Connect the ladder to the screws. Once fastened, it’s firmly in place, without any drilling.
Step 7
08
And that’s that. All that remains for you to do is to put your towels on the decorative ladder and enjoy its practicality and good looks.
Step 8
09
Once the time comes to take down the ladder, that’s effortless. After detaching the ladder itself, you can twist the screws off the wall with pliers.
Step 9
10
What adhesive is left behind can be taken care off with a scraper. Not a trace will remain, and the wall or tile is pristine.
