A bathroom basket for each guest

Collect all required items and let's start!

Cut the photo to 4.5 cm, or print it at that size. Glue the photo or print-out to a piece of white paper. Laminate the paper or have it laminated at a copy shop.

Cut the photos: for the large basket, 4.5 x 24 cm, for the small basket 4.5 x 17 cm.

Measure and mark the side holes for the brackets: 1.8 cm from the outer edge and 2.5 cm from the lower edge. Use the hole punch to the punch holes.

Fasten the pictures by sticking roundhead brackets through the holes in the photostrips and the middle outside holes of the tesa Powerstrips® Waterproof baskets. Bend the brackets open inside the baskets.

Before applying the Powerstrips®, thoroughly clean the tiles with rubbing alcohol or a silicone-free multi-purpose cleaner.

Use the primer cloth that's included in the package to go over the area again. Wait ten seconds.

Apply the Powerstrips® on the baskets with the red line on the downside. Remove the protective film from the Powerstrips®. Press for five seconds.

Press the baskets onto the tiles, slide them upwards and lift them out of the bases.

Press on the bases firmly for at least five seconds.
Set the baskets on the bases and slide them down until they click into place.
The baskets hold as long as you want them. As soon as your guests are gone, you can easily remove them without a trace.

Practical removable and waterproof bathroom caddy - The spacious bathroom storage Powerstrips® Waterproof basket, small and large and adhesive wall hooks make your bathroom organization very easy!