01
Cleaning the surface
Cleaning your surface with a dust-free cloth will ensure optimal holding power. Always test the load-bearing capacity of your surface before mounting.
The smart way to mount or hang objects on textured and sensitive surfaces.
Click through the tabs above this step-by-step video to see how quick and easy it is to get your projects – and your possessions – off the ground.
Hanging a noticeboard takes just a few minutes with a couple Adhesive Nails. Take a look through our step-by-step guide to ensure they stick like they’re supposed to and don’t leave a trace if you ever remove them. This product is not suitable for vinyl wallpaper or non-stick surfaces (e.g. silicon, PTFE).
Cleaning your surface with a dust-free cloth will ensure optimal holding power. Always test the load-bearing capacity of your surface before mounting.
Peel off the Adhesive Strips by taking hold of the tabs – but be careful not to touch the adhesive surfaces themselves. Press the strips vertically to the surface with the blue tabs at the bottom, facing the wall.
Press down firmly across the entire surface of each strip for at least 5 seconds to ensure that the Powerstrips® Technology is activated.
Take off the protective foil where you see the Powerstrips® emblem and align the nails with the top edge of each strip – ensuring that the heads of the nails are at the top – then fold them down onto the adhesive immediately above the grey line.
Press down firmly with both thumbs at the top of each nail for 5 seconds, for 5 seconds in the middle and for another 5 seconds at bottom. That’s it – you’re ready to get hanging!
Your Adhesive Nails are great for any number of things – your imagination’s the only limit – and don’t forget that two nails will support 4kg. Because they’re removable and moveable, you can move stuff around whenever you want.
This bit’s even easier. Just hold the nail head with one hand and with your other hand take hold of the exposed tab. Here’s the trick: without pressing the nail onto the surface, gently stretch the Adhesive Strip down, parallel to the surface and NOT away from it. This action releases the thousands of tiny individual bonds that make up the adhesive surface, ensuring it comes away cleanly and without damaging your wallpaper.