tesa® 50118 PV0 Ultra Low VOC

570 µm water-based acrylic adhesive with PET fleece backing for mounting application in automotive interiors

Product Construction

Backing material PET fleece
Colour white
Colour of liner yellow
Thickness of liner 70 µm
Thickness of tape 570 µm
Type of adhesive type: acrylic
Type of liner type: glassine
Weight of liner 90 g/m²

Properties / Performance Values

Elongation at break 43 %
Tensile strength 35 N/cm
Tack good, medium
Static shear resistance very good
Temperature resistance short term duration 160 °C
Hand tearability low
Noise damping (LV312) Class C
Low VOC very good

Adhesion to Values

Adhesion to PET (initial) 10.1 N/cm
Adhesion to PET fleece surface (after 3 days) 2.5 N/cm
Adhesion to PET fleece Headliner A (after 3 days) 3.4 N/cm
Adhesion to PET (after 3 days) 11.3 N/cm
Adhesion to PET fleece Headliner A (initial) 3.1 N/cm
Adhesion to PET fleece surface (initial) 1.9 N/cm
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Related products