Decorative panels are mounted to the outside of the metal housing with double-sided tape.
Mounting of Design Panels

Mounting of Design Panels

Fixing decorative panels to the outside of the metal housing.



Panels have to be attached in an effective way to ensure that no dust can come through and that the panel will not rattle. This can be done by fixing the front panels using double-sided tape. Pre-assembling the double-sided tape will also raise efficiency.

The tape should have high adhesion to metal and plastic, high shear strength, and long-term temperature resistance up to 70 °C. A thick product design should also be used for noise dampening.

Read more

Products

Show filters
tesa® 4965
Specifications
PET film
tackified acrylic
8.07 mils
50 %
tesa® ACXplus 7042 Gray / White
Specifications
foamed acrylic
pure acrylic
19.68 mils
770 %
tesa® ACXplus 7044 Gray / White
Specifications
foamed acrylic
pure acrylic
39.37 mils
710 %
tesa® ACXplus 7048 Gray/White
Specifications
foamed acrylic
pure acrylic
78.74 mils
730 %
tesa® 62505
Specifications
PE foam
tackified acrylic
19.68 mils
150 %
tesa® 62508
Specifications
PE foam
tackified acrylic
31.49 mils
190 %
tesa® 62510
Specifications
PE foam
tackified acrylic
39.37 mils
180 %
tesa® 64956
Specifications
PE foam
synthetic rubber
31.49 mils
180 %
tesa® 64958
Specifications
PE foam
synthetic rubber
41.33 mils
200 %
tesa® 64962
Specifications
PE foam
synthetic rubber
62.99 mils
180 %
Downloads