66108 PV43_300dpi

tesa® 66108

Product Construction

Type of adhesive tackified acrylic
Total thickness 31.5 mils
800 µm
Backing material PE foam
Color black

Properties / Performance Values

Elongation at break 190 %
Static shear resistance at 23°C very good
Static shear resistance at 70°C good
Tack very good
Tensile strength 4.57 lbs/in
8 N/cm
Temperature resistance long term 176 °F
80 °C
Temperature resistance short term 176 °F
80 °C

Adhesion to Values

Adhesion to Steel (initial) 91.36 oz/in
10 N/cm
Adhesion to PC (after 14 days) 91.36 oz/in
10 N/cm
Adhesion to ABS (initial) 91.36 oz/in
10 N/cm
Adhesion to ABS (after 14 days) 91.36 oz/in
10 N/cm
Adhesion to PP (after 14 days) 91.36 oz/in
10 N/cm
Adhesion to PET (after 14 days) 91.36 oz/in
10 N/cm
Adhesion to PC (initial) 91.36 oz/in
10 N/cm
Adhesion to PET (initial) 91.36 oz/in
10 N/cm
Adhesion to PP (initial) 15.53 oz/in
1.7 N/cm
Adhesion to Steel (after 14 days) 91.36 oz/in
10 N/cm
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Related products