tesa® 54678

Precision die cuts for hole covering applications


Product description

tesa® 54678 die cuts consist of polyethylene extruded cloth based on a 45-mesh woven PET/ rayon fabric, which is coated with a natural rubber adhesive. Die cuts are supplied on a yellow glassine liner.


Product details and specifications

Application Fields

At assembly line for exterior and interior hole covering on all car body areas.
Adhesive Type natural rubber
Backing material PE extruded cloth
Total thickness 250 µm
Elongation at break 8 %
Tensile strength 50 N/cm
Straight tear edge good
Suitable for die cutting yes
Abrasion resistance good
Hand tearability very good
Mesh 45 count per square inch
Temperature resistance (30 min) 203 °F
95 °C
Adhesion to Steel 2.43 lbs/in
4.25 N/cm
We would like to recommend our stock assortment, which includes the following dimensions:
circles: 19 / 30 / 40 / 50 mm diameter

tesa® 54678 is available upon request in customer specific dimensions and can be delivered in either roll form or as sheets.
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads

Download the files below for more technical details and information on this product.

Get in contact with us!

Contact us

Thank you for your message. We will contact you as soon as possible.

Stay tuned.

Something went wrong. Please try again later.

Product comparison

Name of product tesa® 54678 tesa® 54657 Low VOC tesa® 54657 Low VOC tesa® 54657 Low VOC tesa® 54651 Low VOC tesa® 54657 Low VOC tesa® 6042PV0TL ProSeal tesa® 54338PV0 tesa® 54715 Noise Blocker Standard tesa® 54337 PV1 Low VOC tesa® 54332 Heat Performance Sealer
Total thickness
250 µm
290 µm
290 µm
290
310 µm
290 µm
95 µm
1,140 µm
450 µm
1,010 µm
Adhesive Type
natural rubber
thermosetting natural rubber
thermosetting natural rubber
thermosetting natural rubber
natural rubber
thermosetting natural rubber
modified acrylic
modified acrylic
tackified acrylic
modified acrylic
Backing material
PE extruded cloth
Acrylic-coated cloth
Acrylic-coated cloth
Acrylic-coated cloth
Acrylic-coated cloth
Acrylic-coated cloth
PET film
polyolefin
PVC film
aluminum laminated glasscloth
Color
gray
gray
gray
black
gray
colourless
transparent
gray
black
silver
Last updated on Jun 22, 2026