tesa_54657_pr_001_fullsize
Product information

tesa® 54657 Low VOC

Precision die cuts for permanent automotive hole covering applications with high temperature resistance



Product description

tesa® 54657 combines a flexible premium cloth layer with a temperature resistant natural rubber adhesive. This product is optimized for the automotive industry to securely cover holes that require excellent sealing properties in combination with very good conformability and temperature resistance.

Main features:
  • Excellent temperature resistance up to 180°C/356°F
  • Superb conformability to complex geometries
  • Low VOC according to VDA 278 analysis
  • Secure adhesion to almost any substrates
  • Good paint and UBC (PVC) compatibility
  • Good resistance to chemicals
  • Good mechanical properties with respect to abrasion, puncture, and aging resistance
  • Repositionable

Main applications

tesa® 54657 is suitable for different hole covering applications along the automotive production process.

Example applications are:
  • After e-coat where a good compatibility to UBC (PVC) and sealant is required, e.g. car body platform, wheel houses, engine compartment
  • Before paint shop where good paint compatibility is essential
  • At the assembly line for interior hole covering on all car body areas, e.g. pillars, rocker, front/rear floor

To ensure the highest performance possible, our aim is to fully understand your application (including the substrates involved) in order to provide the right product recommendation.
tesa_54657_ap_001_fullsize
tesa_54657_pr_001_fullsize

tesa_54657_ap_001_fullsize

tesa_54657_pr_001_fullsize

Technical properties

Backing material

acrylic-coated cloth

Color

grey

Total thickness

11.41 mils

Type of adhesive

thermosetting natural rubber

Elongation at break

7.5 %

Tensile strength

59.95 lbs/in

Type of liner

paper

Temperature resistance (30 min)

356 °F

Puncture Resistance

350 N

Rating properties

UBC / Paint Compatibility

++

Abrasion resistance

++

Resistance to chemicals

+

Conformability

++

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads
Related products
tesa_51618PV0_pr_001_fullsize
tesa® 51618

PET fleece tape with rubber adhesive

tesa_CIMT_pr_001
tesa® 66022 Ultra Low VOC

220 µm/8.66 mils reinforced water-based acrylic adhesive layer with PET scrim for mounting applications in automotive interiors

tesa_52105_pr_001
tesa® 52105 Ultra Low VOC

50 µm/1.96 mils double-sided, transparent, water-based acrylic transfer tape for lamination applications in automotive interior

tesa_CIMT_pr_001
tesa® 66007 low VOC

75µm reinforced water-based acrylic adhesive layer with PET scrim for mounting in automotive interiors

tesa-4962-double-sided-non-woven-tape-white-transluscent-049620001200-pr
tesa® 4962

Premium double-sided non-woven tape

Hole Covering, die cut, PET, target printing
tesa® 54339 Low VOC

Precision die cuts for permanent automotive exterior hole covering applications with easy quality control

tesa® 50128 Low VOC

390 µm modified acrylic adhesive with PP non-woven backing

tesa_54715_pr_001
tesa® 54715 Noise Blocker Standard

Optimum acoustic insulation die cut for permanent automotive hole covering applications

tesa® 54332 Heat Performance Sealer

The Heat Performance Sealer for permanent hole covering applications

tesa® 54321

Precision die cuts for permanent hole covering of venting holes

tesa_54338_pr_002
tesa® 54338

Precision die cuts for permanent interior automotive hole covering applications with easy quality control

tesa-75013-low-voc-transparent-750130000020-pr
tesa® 75013 Low VOC

130 µm/5.11 mils double-sided, tackified acrylic adhesive tape with PET scrim for mounting and lamination applications in automotive interiors

tesa-7133-interior-surface-protection-and-masking-tape-blue-071330001200-pr
tesa® 7133

Automotive interior surface protection and masking tape

tesa_54678_pr_001_fullsize
tesa® 54678

Precision die cuts for hole covering applications

tesa_60608_pr_001
tesa® 60608 PV1

Premium self-adhesive PET fleece for demanding BSR applications