tesa® 61895 SPT Series

200µm/7.9 mils d/s black Shock and Push-out Technology filmic tape

Product Construction

Backing material PET film
Color black
Color of liner transparent
Thickness of liner 1.97 mils
50 µm
Total thickness 7.87 mils
200 µm
Type of adhesive modified acrylic
Type of liner PET
Weight of liner 99.56 lbs/in²
70 g/m²

Properties / Performance Values

Elongation at break 50 %
Tensile strength 11.42 lbs/in
20 N/cm
Ageing resistance (UV) very good
Humidity resistance very good
Static shear resistance at 23°C good
Static shear resistance at 40°C good
Tack medium, good
Temperature resistance long term 212 °F
100 °C
Temperature resistance short term 392 °F
200 °C

Adhesion to Values

Adhesion to PC (initial) 127.91 oz/in
14 N/cm
Adhesion to PC (after 14 days) 155.32 oz/in
17 N/cm
Adhesion to Steel (initial) 127.91 oz/in
14 N/cm
Adhesion to Steel (after 14 days) 137.04 oz/in
15 N/cm
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Related products