Additional Info
1.Pre-lamination:
tesa HAF® 9402 is laminated before curing. For this process we recommend a temperature between 90°C/194°F and 140°C/284°F.
2. Bonding:
The bonding conditions temperature, pressure and time depend on the application. Following parameters can be regarded as a guideline:
Friction linings for synchronizer rings:
1 Temperature: 180(356) – 230°C/446°F
1 Pressure: > 6 bar
1 Time: 3 min
3. Tempering (optional)
To reach maximum bonding strength the bonded parts can be tempered at 180(356) – 230°C/446°F for 30 - 60 min without pressure.
Bonding strength values were obtained under standard laboratory conditions. Value is guaranteed clearance limit checked with each production batch (Material: Etched aluminium test specimen / Bonding conditions: Temp. = 120 °C(248°F) p = 10 bar; t = 8
min)
To reach maximum bonding strength surfaces should be clean and dry. Storage conditions according to tesa HAF® shelf life concept.