Držák na mýdlo

Soap holder for your bathroom - forget about drilling holes and dowels

A soap holder on the wall next to your sink or in the shower saves space and is very practical, because you can individually place the soap within reach. In most cases, you reach for the drill when attaching it. So valuable tiles, or even pipes can be damaged. With our adhesive soap holders and the tesa® Power.Kit technology, you can attach your holders according to your needs without drilling.

Drilling tiles in the rental apartment: what is allowed?

The law is clear when it comes to drilling holes in the landlord's property. As long as there are sufficient towel rails, shower rods, toilet paper holders and mirrors in the bathroom, it is forbidden to drill any more holes. In particular, it is not allowed to drill into tiles at all. Now if you want to attach a soap holder, better play it safe and attach it without drilling!

tesa® has the adhesive solution - attach soap holder in bathroom and shower without drilling

tesa® Power.Kit technology is revolutionizing the way we renovate our bathrooms. Without any dust, noise, or damage to the wall or tiles, the soap holder sticks to most materials and can be removed with a scraper or brush without leaving any residue.

The advantages of a soap holder for gluing

Here are the main advantages of the bathroom accessories of our tesa® Power.Kit technology:

• No drilling holes in tiles and grout lines
• No fine dust pollution due to drilling
• No danger of damaging water or electrical lines
• No noise pollution for neighbors
• Easy application of the adhesive thanks to adapter
• Secure hold even when in contact with water
• Residue-free removal

The right cleaning agent

Do not clean the surface with the usual bathroom cleaners, but use rubbing alcohol for this purpose. 
It's much easier to simply stick your new soap holder for the shower or at the sink to the wall. It's child's play and can be done without any noise or dirt.

How to mount your soap holder on the wall or in the shower

It is important that you take into account twelve hours of curing time. That's why we recommend starting the installation in the evening and continuing the next morning. In addition, each package of the tesa® Power.Kit technology series contains richly illustrated instructions.

• Select the location where you want to attach your soap holder.
• For the tesa® adhesive to stick to the tile, the surface must be free of dust, grease, lime, and other residues. Use a clean, soft cloth for basic cleaning. Please do not use any non-stick cleaning agents or cleaners containing silicone, as these substances impair the adhesive effect. After basic cleaning, clean with rubbing alcohol. If a cleaning cloth is included with your accessory, please use it.
• Remove the adapter ring from the package and remove the foil from the adhesive surface on the back.
• Place the adapter ring in the desired location and press it firmly against the tile.
• Now everything is ready and the tesa® Power.Kit technology can be used.
• Open the applicator with the corresponding key and insert the opening into the larger hole in the adapter ring.
• Using the key, press adhesive into the adapter until some adhesive comes out on the smaller opening of the adapter.
• Now the back of the adapter is completely filled with adhesive and creates a secure bond with the tile surface.
• At this point, you will need patience. The adhesive needs to cure for twelve hours. Do not touch the adapter during this time and definitely do not check the strength.
• After the waiting period, simply place your fixture on the adapter and tighten the screw with an Allen wrench.

From now on, your soap holder is ready for use and fully loadable. If you want to reposition this at some point, you can remove the adhesive again without leaving any residue. Or you can use the adapter elsewhere with our bathroom accessories for gluing.

Maximum design freedom with our tesa® adhesive bathroom accessories

In the tesa® Power.Kit technology series, you will find the right adapter for every requirement that can be attached in the bathroom without drilling. Discover towel holders, shower squeegees, toilet paper holders as well as soap dispensers and numerous other products. Stick your dream bathroom with our soap holders and other bathroom accessories from tesa®. No tools, no drilling, and no more ugly holes in walls and tiles. 

Tip: By the way, the adhesive solution from tesa® is also available for other rooms in the house.

Be inspired by the variety of designs and order your bathroom accessories from us without drilling!

Držák na mýdlo jednoduše umístíte bez vrtání – do sprchy, k vaně i na umyvadlo. Ať už chcete tuhé mýdlo používat kdekoli, můžete vybírat z nejrůznějších typů v naší nabídce. Design v nerez vzhledu se bude hodit k vašemu umyvadlu, na vanu nebo do sprchy. Díky technologii tesa® Power.Kit je nástěnný držák vhodný i do míst s vysokou vlhkostí – klidně i přímo do sprchových koutů. Umístění držáku lze podle potřeby měnit bez vrtání a následného poškození kachliček. 

Spolehlivé upevnění, bez vrtání a poškození obkladu? S inovativní technologií tesa® Power.Kit je to samozřejmě možné. Voděodolné lepidlo tesa® Power.Kit bylo vyvinuto v Německu a je výbornou volbou pro upevňování i ve vlhkém prostředí. Proto jsou naše výrobky perfektní i pro vaši koupelnu. 

Díky montážním sadám do koupelen tesa® vytvoříte nejen z koupelny praktický prostor bez vrtání či dokonce poškození dlaždic. Krom snadné montáže oceníte také jednoduché přesunutí nebo odstranění sady. Prohlédněte si naši širokou řadu nejen koupelnových doplňků, které nabízejí inovativní a ekonomicky výhodně řešení pro vaše koupelny a toalety. Prozkoumejte náš obrovský výběr potřeb a sad do koupelen, doplňků na toalety i inteligentních řešení pro ukládání v koupelně. Užívejte si nekonečného množství koupelnových doplňků a možností montáže od firmy tesa®!