Dávkovač mýdla

Drilling was yesterday: Stick your soap dispenser on the wall!

A soap dispenser on the wall is practical, hygienic and saves space. Unfortunately, mounting it with a screw and dowel is often complicated. Craftsmanship and the necessary tools are required here. With tesa® Power.Kit technology, you simply stick your attractive soap dispenser to the wall and remove it again without leaving any residue. Without leaving any unsightly drill holes.

The advantages of a soap dispenser for gluing

Here are the main advantages of our tesa® Power.Kit technology bathroom accessories:

• No drilling holes in tiles and grout lines
• No fine dust pollution due to drilling
• No danger of damaging water or electrical lines
• No noise pollution for neighbors
• Easy application of the adhesive thanks to adapter
• Secure hold even when in contact with water
• Removal without residues 

Many tenants are forbidden to make new drill holes even for all non-essential bathroom accessories such as hairdryer holders and towel rails. This includes the soap dispenser. Thanks to the new series from tesa®, you don't have to do without it.

Important: Before you start working, the surface must be thoroughly cleaned.

The right cleaning agents

Do not clean the substrate with the usual bath cleaning agents but use cleaning alcohol for this purpose.

How to attach the soap dispenser without drilling

It is important that you take into account twelve hours of curing time. That's why we recommend starting installation in the evening and continuing the next morning. In addition, each package of the tesa® Power.Kit Technology Series contains richly illustrated instructions.

1. Clean the area as described above where you want to attach your new soap dispenser. 
2. In order for tesa® Power.Kit Technology to develop its full holding power, the surface must be free of dust, grease, lime, and other residues. Use a clean, soft cloth for basic cleaning. Please do not use any non-stick cleaning agents or cleaners containing silicone, as these substances impair the adhesive effect. After basic cleaning, clean with rubbing alcohol. If a cleaning cloth is included with your accessory, please use it.
3. Remove the adapter ring from the package and remove the foil from the adhesive surface on the back.
4. Place the adapter ring in the desired location and press it firmly against the tile.
5. Now everything is ready and the tesa® Power.Kit technology can be used.
6. Open the applicator with the applicator key and insert the opening into the larger hole in the adapter ring.
7. Using the key, press adhesive into the adapter until some adhesive comes out on the smaller opening of the adapter.
8. Now the back of the adapter is completely filled with adhesive and creates a secure bond with the tile surface.
9. At this point, you will need patience. The adhesive needs to cure for twelve hours. Do not touch the adapter during this time and definitely do not check the strength.
10. After the waiting period, simply place your soap dispenser on the adapter and tighten the screw with an Allen key. Enjoy your new bathroom accessory from now on!

More questions about toilet brush holder for gluing

tesa® Power.Kit technology offers you numerous advantages, but may also raise questions. Here you will find the most important answers.

Is the adhesive toxic?

Pure skin contact and inhalation of the vapors released when filling the adhesive is completely harmless. Avoid contact with the eyes or mouth.

How long does the adhesive last?

The adhesive is rot-proof and water-resistant. If you want to remodel your bathroom or guest WC, you can still remove your soap dispenser specifically and easily remove the adhesive residue with a scraper or brush.

Maximum design freedom with our tesa® adhesive bathroom accessories

Stick your dream bathroom with soap dispensers and other bathroom accessories from tesa®. No more tools, drilling, or ugly holes in walls and tiles. You no longer have to watch out for power or water lines either, as you can simply stick your soap dispenser and other accessories where you need them and then remove them again without leaving any residue.
Test the adhesive soap dispenser in your bathroom and discover many other attractive accessories from the new series of tesa® Power.Kit technology!

Chcete mít v koupelně něco originálnějšího než plastové či keramické dávkovače tekutého mýdla na postavení? Naše dávkovače mýdla jednoduše umístíte na zeď bez dodatečného vrtání. 

Nástěnné dávkovače na mýdlo nabízíme v několika variantách s praktickou pumpičkou, držákem nerezového vzhledu a skleněným zásobníkem. 

Spolehlivé upevnění, bez vrtání a poškození obkladu? S inovativní technologií tesa® Power.Kit je to samozřejmě možné. Voděodolné lepidlo tesa® Power.Kit bylo vyvinuto v Německu a je výbornou volbou pro upevňování i ve vlhkém prostředí. Proto jsou naše výrobky perfektní i pro vaši koupelnu. 

Díky montážním sadám do koupelen tesa® vytvoříte nejen z koupelny praktický prostor bez vrtání či dokonce poškození dlaždic. Krom snadné montáže oceníte také jednoduché přesunutí nebo odstranění sady. Prohlédněte si naši širokou řadu nejen koupelnových doplňků, které nabízejí inovativní a ekonomicky výhodně řešení pro vaše koupelny a toalety. Prozkoumejte náš obrovský výběr potřeb a sad do koupelen, doplňků na toalety i inteligentních řešení pro ukládání v koupelně. Užívejte si nekonečného množství koupelnových doplňků a možností montáže od firmy tesa®!