tesa® 4438

UV Surface Protection Tape


Product description

The combination of the impregnated backing material with the high UV resistance facilitates multiple working processes in only one covering process.


Product details and specifications

Application Fields

This tape is especially suited for all renovation works, particularly for outdoor painting, fasade renovation as well as for heat protection. tesa® 4438 is especially suitable for the sticking on water diluted acrylic paints. It can be used as a protection tape during transport or storage of high value surfaces. tesa® 4438 is suitable for short term masking during wave soldering and other high temperature processes as well.
Backing material flat paper
Total thickness 167 µm
Type of adhesive acrylic
Elongation at break 5 %
Tensile strength 33 N/cm
Hand tearability very good
Temperature resistance (30 min) 60 °C
Suitable for rough surfaces good
Adhesion to steel 4 N/cm
The application of an adhesive tape on weathered surfaces may lead to residues during the de-masking. Therefore we strongly recommend a test application before.
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads

Download the files below for more technical details and information on this product.

Get in contact with us!

Contact us

Thank you for your message.

We will contact you as soon as possible.

Something went wrong. Please try again later.

Product comparison

Name of product tesa® 4438 tesa® 4414 tesa® 7009 tesa® 4328 Yellow tesa® 51915 tesa® 4441 tesa® 61914 tesa® 53123 PV18 tesa® CaRes 51455 PV11 tesa® 51191 tesa® 4318 PV2
Total thickness
167 µm
150 µm
285 µm
165 µm
50 µm
140 µm
75 µm
135 µm
80 µm
130 µm
170 µm
Type of adhesive
acrylic
water-based acrylic
tackified acrylic
natural rubber
repulpable tackified acrylic
repulpable tackified acrylic
modified acrylic
natural rubber
repulpable tackified acrylic
modified acrylic
natural rubber
Backing material
flat paper
PE film
non-woven
slightly-creped paper
none
slightly-creped paper
non-woven
slightly-creped paper
flat paper
Splittable paper
slightly-creped paper
Adhesion to steel
4 N/cm
2.2 N/cm
4.8 N/cm
2.6 N/cm
4 N/cm
Tensile strength
33 N/cm
23 N/cm
40 N/cm
75 N/cm
27 N/cm
47 N/cm
Elongation at break
5 %
400 %
10 %
11 %
10 %
6 %
12 %
Last updated on 23 June 2026