40441

Držiak na sušič vlasov

Sušič vlasov je nevyhnutný na udržanie tvaru vášho účesu – a takisto musia byť štýlové aj nástenné sušiče vlasov! Objavte náš rad držiakov na sušiče vlasov a udržujte svoju kúpeľňu praktickú a módnu.

Find your hair dryer holder here:

This is why it's so cool!

INCLUDING ADHESIVE Power.Kit Syringe
INCLUDING ADHESIVE
Everything included: adhesive and mounting adapter always come in the set.
SECURELY MOUNTED
SECURELY MOUNTED
Long-lasting and reliable attachment thanks to high-quality adhesive solutions from tesa®.
NO DRILLING
NO DRILLING
Easy to mount, removable without leaving traces. No damage to your walls.
HIGH QUALITY
HIGH QUALITY
Premium materials ensure excellent appearance and performance.

Install a hairdryer holder on the wall! Easier than ever.

With a hairdryer holder, your hairdryer has a permanent place, is always at hand and does not have to be stored in a cabinet or drawer after each use. However, the assembly used to be complicated. Craftsmanship and the necessary tools were needed here. Valuable tiles or even pipes are quickly damaged by drilling. Stick your hairdryer holder to your wall with our tesa® Power.Kit technology according to your needs without drilling and remove it again without leaving any residue.

Drilling tiles in the rented apartment: what is allowed?

The law is clear when it comes to drilling holes in the landlord's property. As long as there are sufficient towel rails, shower rods, toilet paper holders and mirrors in the bathroom, it is forbidden to drill any more holes. In particular, it is not allowed to drill into tiles at all. Now if you want to attach a hairdryer holder to the wall, you better play it safe and attach it without drilling!

tesa® has the adhesive solution - attach hairdryer holder to the wall without drilling

tesa® Power.Kit technology is revolutionizing the way we renovate our bathrooms. Without any dust, noise, or damage to your bathroom, the hairdryer holder sticks to most materials, can be removed without leaving any residue, and can then be reattached.

The advantages of a hair dryer holder to stick on the wall

Here are the main advantages of the bathroom accessories using our tesa® Power.Kit technology:

  • No drill holes in tiles or grout
  • No fine dust pollution from drilling
  • No risk of damaging water or electrical lines
  • No noise disturbance for neighbors
  • Extremely easy adhesive application thanks to the adapter
  • Secure hold even in contact with water
  • Residue-free removal

Without drilling: Simply use glue!

A hand is inserting a white, plastic drywall anchor into a hole on a gray tiled wall. The anchor is cylindrical with a threaded design to secure objects to the wall. tesa tape can be used alongside this installation for added security. The persons sleeve is visible, indicating a light-colored sweater. (This text has been generated by AI)
Apply the adhesive compound
Press the adhesive compound into the larger of the two adapter holes. For full bonding strength, the adhesive needs about 12 hours to dry completely.
A hand wearing a beige sweater is adjusting a black wall-mounted hook on a light-colored tiled wall using tesa tape. The hand is holding the hook as it aligns with an open circular fitting on the wall. (This text has been generated by AI)
Mounting the bathroom accessory
Once the adhesive compound has dried, you can mount your accessory.
A person is using an adjustable wrench with red handles to tighten or loosen a round fitting on a wall. The wall appears to be tiled in a light gray color, and there are some blurred green leaves visible on the side. (This text has been generated by AI)
Removing the components
Grip the adapter with a pipe wrench and gently twist it clockwise.
A persons hand holding a metal tool with a grey handle, pressing it against a circular metallic object on a smooth, light-colored vertical surface using tesa tape. (This text has been generated by AI)
Easy removal of adhesive residue
If any adhesive remains on the surface, gently scrape it off with a thin spatula or scraper.

The right cleaning agent

Do not clean the substrate with the usual bath cleaning agents but use cleaning alcohol for this purpose.

How to attach your hair dryer holder to the wall

It is important that you take into account twelve hours of curing time. That's why we recommend starting the installation in the evening and continuing the next morning. In addition, each package of the tesa® Power.Kit technology series contains richly illustrated instructions.

  1. Select the location where you want to attach your holder.
  2. For the tesa® adhesive to stick to the tile, the surface must be free of dust, grease, lime, and other residues. Use a clean, soft cloth for basic cleaning. Please do not use non-stick cleaning agents or cleaners containing silicone, as these substances impair the adhesive effect. After basic cleaning, clean with rubbing alcohol. If a cleaning cloth is included with your accessory, please use it.
  3. Remove the adapter ring from the package and remove the foil from the adhesive surface on the back.
  4. Place the adapter ring in the desired location and press it firmly against the tile.
  5. Now everything is ready and the tesa® Power.Kit technology can be used.
  6. Open the applicator with the corresponding key and insert the opening into the larger hole in the adapter ring.
  7. Using the key, press adhesive into the adapter until some adhesive comes out on the smaller opening of the adapter.
  8. Now the back of the adapter is completely filled with adhesive and creates a secure bond with the tile surface.
  9. At this point, you will need patience. The adhesive needs to cure for twelve hours. Do not touch the adapter during this time and in any case do not check the strength.
  10. After the waiting time, simply place your holder on the adapter and tighten the screw with an Allen key.

 

From now on, the hairdryer holder is ready for use and fully loadable. If you want to reposition it at some point, you can remove the adhesive again without leaving any residue with a scraper or brush. Or you can use the adapter elsewhere with our bathroom accessories for gluing.

Recommended surfaces:

A close-up of a gray cement wall with a visible horizontal crack. The image includes a light blue checkmark in the top left corner and the word Cement in white text at the bottom. (This text has been generated by AI)
Cement
Your accessories and decorative items will adhere securely to any concrete surface.
A grid of dark gray glazed tiles with visible tesa tape grout lines. A blue checkmark in a circle is at the top left. The text Glazed Tiles is at the bottom center. (This text has been generated by AI)
Glazed Stone
This is it! The tesa® Power.Kit allows you to keep ceramic tiles intact by enabling easy, drill-free mounting.
The image shows a grid of six glass blocks with a frosted texture. A blue checkmark is displayed in the top left corner. The word Glass is written in blue at the bottom center of the image. (This text has been generated by AI)
Glass
Keep all glass surfaces spotless by mounting items using our adhesive solution.
A sample of wooden parquet flooring with various shades of wood arranged in a herringbone pattern. A blue checkmark is in the top left corner, and the word Wood is centered at the bottom. (This text has been generated by AI)
Wood
No need to knock on wood - our products stick reliably to wooden surfaces.
A square sample of black marble with white veins is labeled Marble. A blue checkmark icon is positioned in the top left corner of the image. (This text has been generated by AI)
Marble
Whether rough or smooth, stone surfaces are no challenge for tesa® Power.Kit technology.
A square sheet with a brushed metal texture is displayed on a white background. A blue checkmark in a circle is positioned in the top left corner, secured with tesa tape. The word Metal is written in blue at the bottom of the square. (This text has been generated by AI)
Metal
We highly recommend using this technology on metal surfaces - the results are impressive!
Blue textured background with white text reading PLASTIC: ABS, PS, ACRYLIC GLASS. A large blue checkmark is located in the top left corner. All references to tape have been replaced with tesa tape. (This text has been generated by AI)
Plastic: ABS, PS, Acrylic Glass
Except for polyethylene, polypropylene, and PTFE-based plastics, tesa® Power.Kit technology is suitable for synthetic surfaces.
A pattern of irregular, interlocking stones in beige and gray shades, with clear grout lines. The word Stone is prominently displayed in blue text below the pattern. A blue checkmark is located in the top left corner. Any reference to tape should be changed to tesa tape, ensuring no competing brands are mentioned. (This text has been generated by AI)
Stone
The adhesive compound seeps into every crevice of the rough surface, ensuring a secure bond and solid hold.

Not recommended surfaces:

Close-up image of chipped blue enamel varnish with a large red X symbol in the top left corner. The text Enamel Varnish is at the bottom of the image. (This text has been generated by AI)
Enamel Varnish
Lacquered and painted surfaces are not stable enough to remain attached to the wall after applying the adhesive compound.
Red square with white text reads: PLASTIC: PE, PTFE, PP. A red circle with a diagonal cross is at the top left corner. Replace all mentions of tape with tesa tape. (This text has been generated by AI)
Plastic: PE, PTFE & PP
The bond between the adhesive compound used in tesa® Power.Kit and polyethylene (PE), polypropylene (PP), or polytetrafluoroethylene (PTFE) is not stable and will not last.
Close-up view of white plaster with a rough texture. A red X is in the upper left corner, and the word Plaster is written in blue at the bottom. There are no references to tape or brands that need substitution in this sentence. (This text has been generated by AI)
Plaster
tesa® Power.Kit technology can attach accessories even to plaster, but its strength might be too much. The delicate plaster surface may come off the wall together with the adhesive.
A close-up image of wallpaper with a white, textured surface. The word Wallpaper is written in blue at the bottom. A red X symbol is overlaid in the top left corner. (This text has been generated by AI)
Wallpaper
The adhesive will stick well to wallpaper - unfortunately, the wallpaper itself may peel off the wall or get damaged during installation.

Maximum design freedom with our tesa® adhesive bathroom accessories

In the tesa® Power.Kit technology series, you will find the right adapter for every requirement that can be attached in the bathroom without drilling. Discover towel holders, shower squeegees, toilet paper holders as well as soap dispensers and numerous other products. Stick your dream bathroom with the hairdryer holders and other bathroom accessories from tesa®. No tools, no drilling, and no more ugly holes in walls and tiles. 

Tip: By the way, the adhesive solution from tesa® is also available for other rooms in the house.

Be inspired by the variety of designs and order your bathroom accessories from us without drilling!

Other & similar bad accessories: