tesa® 61101
EPDM rubber closed cell single sided foam tape 1.6mm thick (black)
Product description
tesa® 61101 is a high-performance 1.6mm thick closed cell EPDM foam tape with an acrylic adhesive on one side. The EPDM foam is non-staining, non-corrosive and electrically non-conductive. The foam offers high temperature resistance (-40°C to 105°C) as well as resistance to UV light and ozone. tesa® 61101 is FDA approved to Section 177.26 (non-toxic, non-carcinogenic) standards and will not contaminate drinking water. It complies with auto industry standards and is compatible with plastics. The EPDM foam is flame retardant for thicknesses ≥ 2.5mm according to Federal Motor Vehicle Safety Standard (FMVSS 302). The tape is available in six other thicknesses: 3.2 mm (tesa® 61102), 4.8 mm (tesa® 61103), 6.4 mm (tesa® 61104), 9.5 mm (tesa® 61105), 12.7 mm (tesa® 61106) and 19 mm (tesa® 61107).
Product details and specifications
Application Fields
- tesa® 61101 foam tape is an ideal sealing solution for a wide range of sealing applications across the automotive, marine, food and beverage, enclosure and window glazing industries.
- Sealing electrical enclosures and switch cabinets
- Sealing exterior and interior lighting
- Sealing industrial access doors and hatches
- Sealing hatches on boats
- Sealing domestic and commercial glazing systems
- Sealing externally mounted air conditioning equipment
- REACH and RoHS Certified
Product Construction
Backing material | EPDM rubber foam |
---|---|
Total thickness | 1600 µm |
Type of adhesive | acrylic |
Product Construction
Backing material | EPDM rubber foam |
---|---|
Total thickness | 1600 µm |
Type of adhesive | acrylic |
Properties / Performance Values
Elongation at break | 175 % |
---|---|
Flame retardance | very good |
Water resistance | very good |
Temperature resistance min. | -40 °C |
Compression set | 7 % |
Tensile strength cm2 | 54 N/cm² |
Hardness - Shore 00 | 37 STK |
Suitable for die cutting | yes |
Temperature resistance max. | 105 °C |
Properties / Performance Values
Elongation at break | 175 % |
---|---|
Flame retardance | very good |
Water resistance | very good |
Temperature resistance min. | -40 °C |
Compression set | 7 % |
Tensile strength cm2 | 54 N/cm² |
Hardness - Shore 00 | 37 STK |
Suitable for die cutting | yes |
Temperature resistance max. | 105 °C |
Adhesion to Values
Adhesion to steel | 12 N/cm |
---|
Adhesion to Values
Adhesion to steel | 12 N/cm |
---|
Download the files below for more technical details and information on this product.
