tesa_66007_pr_001
Product information

tesa® 66022 low VOC

220µm reinforced water based acrylic adhesive layer with PET scrim for mounting in automotive interiors



Product description

tesa® 66022 is a conformable transparent adhesive layer of water based acrylic reinforced with a PET scrim mesh.

Features:
1 very low total VOC values and no critical substances detectable
1 high initial tack and peel adhesion
1 high conformable design following 3D shapes
1 provides excellent conformability and stability
1 provides excellent initial adhesion to a wide variety of interior substrates
1 suitable for the bonding to nonpolar plastics, foams, felts and fabrics
1 suitable for a certain gap filling due to thick adhesive layer
1 reliable adhesion performance for the whole vehicle life time
1 the scrim provides a reinforcement of flexible substrates for improving converting efficiency and handling

Main applications

immediate secure fixation of light, stiff, rigid, rough parts in vertical and horizontal position
e.g. energy absorber mounting (HIC, crash pad ...)

mounting of plastics as well LSE plastics
1 with difficult wet-out
1 permanent low load

Lamination or mounting of critical, soft, light and smooth surfaces / sheets
1 immediate and secure bending around the edge
tesa_66007_pr_001

tesa_66007_pr_001

Technical properties

Thickness of tape

220 µm

Type of adhesive

water-based acrylic

Temperature resistance up to

200 °C

Type of liner

glassine

Colour of liner

brown/blue logo

Temperature resistance from

-40 °C

Total thickness

220 µm

Backing material

none

Color

transparent

Adhesion properties

Adhesion to Steel (initial)

12.3 N/cm

Adhesion to PE (initial)

9.2 N/cm

Adhesion to ABS (after 3 days)

18 N/cm

Adhesion to PP (after 3 days)

16 N/cm

Adhesion to ABS (initial)

17 N/cm

Adhesion to PET fleece Headliner A (after 3 days)

8 N/cm

Adhesion to PC (initial)

19.1 N/cm

Adhesion to PVC (initial)

12 N/cm

Adhesion to PS (initial)

17.7 N/cm

Adhesion to PET fleece Headliner A (initial)

6 N/cm

Adhesion to Steel (after 3 days)

17.3 N/cm

Adhesion to PET (initial)

16.2 N/cm

Adhesion to PET (after 3 days)

18.1 N/cm

Adhesion to PS (after 3 days)

18.2 N/cm

Adhesion to PVC (after 3 days)

19.3 N/cm

Adhesion to PE (after 3 days)

9 N/cm

Adhesion to PC (after 3 days)

19.4 N/cm

Adhesion to PP (initial)

14 N/cm

Rating properties

Conformability

++

Tack

++

Suitable for die cutting

Yes

Storage conditions

23°C, 50% RH, stored in original box

Fogging

++

Low VOC

++

Suitable for rough surfaces

++

Additional Info

Is designed to fulfill the low VOC (Volatile Organic Compounds) automotive requirements set forth by the Japanese Ministry of Health, Labor and Welfare (MHLW) and the Japanese Automobile Manufacturers Association (JAMA) limit of concentrations of 13 toxic chemistries. Acc. Toyota TSK0508G our assortment is conform Japanese automotive requirements

Adhesion vaules to:
PVC
PP
ABS
PC
PET
PS
PE
Are not part of the product specification


PV20 brown glassine liner / blue tesa logo
other liner version possible - on request

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads
Related products

Related applications