PDF – 34 kB
Product description
tesa® 51025 PV10 is a PET cloth wire harness tape with a solvent-free rubber based adhesive.Major Features:
- Temperature resistance 125°C/3000h
- Solvent-free adhesive
- Handtearable
Color: Black
Main applications
tesa® 51025 PV10 is designed for wrapping up to a temperature class of 125°C.
Technical properties
Elongation at break
25 %
Type of adhesive
rubber based
Abrasion resistance (5mm mandrel)
Class A (acc. to LV312)
Temperature resistance min.
-40 °C
Temperature resistance (3000h)
125 °C
Tensile strength
80 N/cm
Unwind force (roll width ≤ 9mm)
8 N/roll (30 m/min)
Unwind force (roll width > 9mm)
8 N/roll (30 m/min)
Total thickness
160 µm
Backing material
PET cloth
Adhesion to steel
6.5 N/cm
Flame resistance as composite
Class B (acc. to LV312)
Noise damping (decibel)
Class A (acc. to LV312)
Abrasion resistance (10mm mandrel)
Class B (acc. to LV312)
Dielectric breakdown voltage
6300 volt
Additional Info
Standard widths: 9, 19, 25, 32, 38 mmStandard lengths: 25, 50 m
- Most combinations of width and length are possible
- Further dimensions are available upon request
- Standard core diameter: 38 mm
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Related products
