tesa® 50118 PV1

Conformable thick PET fleece tape for cable mounting in automotive interiors

Product Features

Excellent damping properties
Low VOC (according to GB 27630) – no critical substances detectable
High peel resistance on irregular, rough, and nonpolar surfaces

All product features

Product description

tesa® 50118 PV1 is a conformable thick PET fleece tape with a new designed acrylic adhesive for applications in automotive interiors.
Features:

high initial wet out

excellent damping properties

good peel resistance

suitable for common irregular, rough and critical interior surfaces

often suitable without any kind of surface pretreatments

can be used with automatic tape dispensers

Product details and specifications

Product Features

Excellent damping properties
Low VOC (according to GB 27630) – no critical substances detectable
High peel resistance on irregular, rough, and nonpolar surfaces
High shear strength
Tear resistant
Suitable for automatic tape dispensers

Application Fields

Cable mounting
For quick and secure fixation of flat and round cables with excellent damping properties

Backing material	PET fleece
Color	black/white
Colour of liner	yellow
Thickness of liner	75 µm
Thickness of tape	540 µm
Type of adhesive	acrylic
Type of liner	glassine
Weight of liner	90 g/m²

Backing material	PET fleece
Color	black/white
Colour of liner	yellow
Thickness of liner	75 µm
Thickness of tape	540 µm
Type of adhesive	acrylic
Type of liner	glassine
Weight of liner	90 g/m²

Elongation at break	70 %
Tensile strength	31 N/cm
Hand tearability	low
Static shear resistance	very good
Noise damping (LV312)	Class C
Temperature resistance short term	160 °C
Tack	very good
Suitable for rough surfaces	very good
Low VOC	very good

Elongation at break	70 %
Tensile strength	31 N/cm
Hand tearability	low
Static shear resistance	very good
Noise damping (LV312)	Class C
Temperature resistance short term	160 °C
Tack	very good
Suitable for rough surfaces	very good
Low VOC	very good

Adhesion to PET (initial)	8.5 N/cm
Adhesion to PET fleece Headliner A (initial)	3.9 N/cm
Adhesion to PET fleece surface (after 3 days)	5.2 N/cm
Adhesion to PET fleece Headliner A (after 3 days)	5.9 N/cm
Adhesion to PET fleece surface (initial)	5.2 N/cm
Adhesion to PET (after 3 days)	9.1 N/cm

Adhesion to PET (initial)	8.5 N/cm
Adhesion to PET fleece Headliner A (initial)	3.9 N/cm
Adhesion to PET fleece surface (after 3 days)	5.2 N/cm
Adhesion to PET fleece Headliner A (after 3 days)	5.9 N/cm
Adhesion to PET fleece surface (initial)	5.2 N/cm
Adhesion to PET (after 3 days)	9.1 N/cm

¹ Kiss-cut solutions or die-cuts are available under tesa® 54118PV1 (white and black) tesa’s automation and application department provides customized equipment and self-designed application tools to enhance productivity

Adhesion values to:
PET
PET fleece surface
PET fleece Headliner A
Are not part of the product specification

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads

Download the files below for more technical details and information on this product.

Product information_tesa® 50118_en-SG 65.9 kB