tesa® 60652
Product details and specifications
| Backing material | aluminium foil |
|---|---|
| Colour of liner | white |
| Thickness of liner | 85 µm |
| Total thickness | 90 µm |
| Type of adhesive | acrylic |
| Type of liner | paper |
| Elongation at break | 6 % |
|---|---|
| Tensile strength | 40 N/cm |
| Abrasion resistance | good |
| Water resistance | very good |
| Operation temperature from | -40 °C |
| Operation temperature up to | 160 °C |
| Hand tearability | very good |
| Suitable for die cutting | yes |
| Release of liner | easy |
| Backing appearance (visual) | reflective |
| Temperature resistance min. | -40 °C |
| Temperature resistance (30 min) | 0 °C |
| Liner release force | 0.3 N/cm |
| Easy to remove | no |
| Adhesion to Backing | 9 N/cm |
|---|---|
| Adhesion to Glass (initial) | 9 N/cm |
| Adhesion to PE (initial) | 4.5 N/cm |
| Adhesion to PVC (initial) | 6 N/cm |
| Adhesion to steel | 9 N/cm |
Certificates
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
Contact us
Product comparison
Last updated on 4 June 2024