tesa® 6957 PV3 Black Matt FPC

High heat resistant, high-speed markable and fraud resistant tape

Product description

tesa® 6957 is a double layer, brittle acrylic film with watermark. Customized and fraud-resistant information, such as company logo, is permanently embedded in the backing. Marking and cutting are achieved by laser in one step, which makes it possible to realize any desirable label variation and format using only one material. The backing is highly resistant against chemicals, abrasion, temperature and aging.
The adhesive system consists of a resin modified acrylic suitable even for low energy surfaces. The adhesive will leave an UV-detectable trace (“UV-Footprint”) on most surfaces as required by GB 25978 (P.R.C.) and NHTSA §541.5 (USA).
The use of a high-speed laser enables a considerably quick marking up to 4000mm/ sec.

Product details and specifications

Application Fields

This high performance product is used as a tamper evident identification label over the entire lifetime of a product and also as a data carrier system for intelligent in-process steering.
The product is specially designed to fulfill the requirements of GB 25978 (P.R.C.) for F-Type labels (engine & transmission).

Customized Watermark embossed in the backing
High contrast and excellent marking precision
Very resistant to heat, abrasion and chemicals
Tamper Evident: Manipulation leaves visible trace
Not removeable without destruction of the label
Flexible formatting and label design: marking and cutting by the laser
Efficient: Replaces a multitude of pre-made labels
Just-in-time production reduces storage needs

Backing material	Acrylic
Type of adhesive	acrylic
Type of liner	coated paper
Weight of liner	120 g/m²

Temperature resistance long term	150 °C
Frost resistance	-40 °C
Humidity resistance	very good
Chemical resistance	very good
Ageing resistance (UV)	very good
Suitable laser	Nd:YAG, Yb:YAG
Temperature resistance short term	250 °C
Peel off force from liner	0,5-10
Tamper evidence	yes

Dimensions: Customer specific
Standard Width: 100mm or 120mm
Standard Length: 200m or 300m

Assortment and Technical Data:
6957 PV3 black/ white glossy: Adhesive 25g/m², Thickness 95µm without Liner. Color code: 04
6957 PV3 black/ white matt: Adhesive 25g/m², Thickness 95µm without Liner. Color code: 28
6957 PV1 black/ white glossy: Adhesive 35g/m², Thickness 127µm without Liner. Color code: 04
6957 PV1 black/ white matt: Adhesive 35g/m², Thickness 127µm without Liner. Color code: 28

To fulfill our customers’ requirements for different applications and substrates the tesa® 6957 series is available in different product variants. Our aim is to fully understand your application in order to provide the right product recommendation. Our technical support is available upon request.

Optional: UV-Footprint adhesive (MU49):
tesa® 6957 MU49 is equipped with a special acrylic adhesive system, which leaves an UV-detectable trace (“UV-Footprint”). This special variant is available upon request.

Optional: LSE adhesive with UV-Footprint (MU56):
tesa® 6957 MU56 is equipped with a special acrylic adhesive system improved for rough and low surface energy (LSE) surfaces, which leaves an UV-detectable trace (“UV-Footprint”). This special variant is available upon request.

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads

Download the files below for more technical details and information on this product.

Product information_tesa® 6957_en-SG 51.3 kB

Contact us

Thank you for your message.

We will contact you as soon as possible.

Something went wrong. Please try again later.

Product comparison

Name of product	tesa® 6957 PV3 Black Matt FPC	tesa® 6950 PV3 Black Matt FPA	tesa® 6957 PV1 Black Glossy FPA	tesa® 6957 PV3 Black Glossy FPA	tesa® 6930 PV3 Silver Glossy	tesa® 6925 Black	tesa® 6957 PV1 Black Matt FPC	tesa® 6930BK3 PV3 Black	tesa® 6940 PV3 Black Glossy FPA	tesa® 6930 PV8 White	tesa® Laser Markable Film 6930BM3 Black Matt / White Text
Type of adhesive	acrylic	acrylic	acrylic	acrylic	acrylic	acrylic	acrylic	acrylic	acrylic	acrylic	acrylic
Backing material	Acrylic	Acrylic film	Acrylic	Acrylic	Acrylic	Acrylic	Acrylic	Acrylic	Acrylic	Acrylic	Acrylic
Type of adhesive	type: acrylic	type: acrylic	type: acrylic	type: acrylic	type: acrylic	type: acrylic	type: acrylic	type: acrylic	type: acrylic	type: acrylic	type: acrylic
Temperature resistance short term	250 °C	250 °C	250 °C	250 °C	250 °C	270 °C	250 °C	250 °C	250 °C	180 °C	250 °C
Temperature resistance long term	150 °C	150 °C	150 °C	150 °C	120 °C	120 °C	150 °C	120 °C	120 °C	120 °C	120 °C
Suitable laser	Nd:YAG, Yb:YAG	Nd:YAG, Yb:YAG	Nd:YAG, Yb:YAG	Nd:YAG, Yb:YAG	Nd:YAG, Yb:YAG	Yb:YAG	Nd:YAG, Yb:YAG	Nd:YAG, Yb:YAG	Nd:YAG, Yb:YAG	Nd:YAG, Yb:YAG	Nd:YAG, Yb:YAG
Total thickness		122 µm	122 µm	122 µm

Last updated on 7 May 2024

tesa® 6957 PV3 Black Matt FPC

Product details and specifications

Application Fields

Additional Info

Contact us

Thank you for your message.