PDF – 35 kB
Product descriptiontesa® 51903 is a double-sided adhesive tape, consisting of a PVC-film without liner.
The adhesive on both sides is exactly balanced, so that tesa® 51903 can be unwound easily, even after long periods in storage.
- Mounting of light weight parts
- Splicing of various materials such as plastic, metal foils, paper and cardboards.
- The acrylic-mass system has different adhesion values on each side. tesa® 51093 is therefore especially suited as closure system even for thin film bags.
Elongation at break
Type of adhesive
Adhesion to Steel (initial)
Adhesion to PE (initial)
Adhesion to PC (after 14 days)
Adhesion to PS (after 14 days)
Adhesion to ABS (initial)
Adhesion to ABS (after 14 days)
Adhesion to PP (after 14 days)
Adhesion to PET (after 14 days)
Adhesion to Aluminium (after 14 days)
Adhesion to PC (initial)
Adhesion to PVC (initial)
Adhesion to PE (after 14 days)
Adhesion to PS (initial)
Adhesion to PET (initial)
Adhesion to Aluminium (initial)
Adhesion to PP (initial)
Adhesion to Steel (after 14 days)
Adhesion to PVC (after 14 days)
Static shear resistance at 23°C
Resistance to chemicals
Ageing resistance (UV)
Temperature resistance long term
Static shear resistance at 40°C
Temperature resistance short term
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.