Call us

tesa® 50600 Standard
Green polyester/silicone masking tape
Product description
tesa® 50600 is a green, high-temperature masking tape featuring a polyester backing with a silicone adhesive. Features and benefits include:
- Easy to apply
- High temperature resistance - up to 220°C / 428°F (30min.)
- One piece removal without leaving residues
- Easy to apply
- High temperature resistance - up to 220°C / 428°F (30min.)
- One piece removal without leaving residues
Application Fields
Masking off areas not to be coated during powder coating process.
1 / 10
2 / 10
3 / 10
4 / 10
5 / 10
6 / 10
7 / 10
8 / 10
9 / 10
10 / 10
Product Construction
Backing material | PETP |
Type of adhesive | silicone |
Total thickness | 80 µm |
Properties / Performance Values
Elongation at break | 110 % |
Tensile strength | 75 N/cm |
Hand tearability | low |
Temperature resistance | 220 °C |
Easy to remove | Yes |
Adhesion to Values
Adhesion to steel | 4 N/cm |
Additional Info
tesa® 50600 is also available on a special PET liner.
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads