tesa® 4687
Product details and specifications
| Backing material | PE extruded cloth |
|---|---|
| Total thickness | 260 µm |
| Type of adhesive | natural rubber |
| Elongation at break | 20 % |
|---|---|
| Tensile strength | 55 N/cm |
| Operation temperature up to | 60 °C |
| Hand tearability | good |
| Available as Spools | no |
| Temperature resistance (removability from aluminum after 30 min exposure) | 80 °C |
| Lowest application temperature | 0 °C |
| Mesh | 55 count per square cm |
| Straight tear edges | medium |
| Temperature resistance (30 min) | 80 °C |
| Abrasion resistance | good |
| Water resistance | good |
| Adhesion to steel | 4 N/cm |
|---|
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
Contact us
Product comparison
Last updated on 18 May 2026