tesa® 7493
Product details and specifications
Product Construction
| Backing material | PE foam |
|---|---|
| Total thickness | 6000 µm |
| Type of adhesive | acrylic |
Product Construction
| Backing material | PE foam |
|---|---|
| Total thickness | 6000 µm |
| Type of adhesive | acrylic |
Properties / Performance Values
| Elongation at break | 175 % |
|---|---|
| Chemical resistance | very good |
| Tensile strength cm2 | 40 N/cm² |
| Temperature resistance min. | -80 °C |
| Water resistance | very good |
| Flame retardance | very good |
| Temperature resistance max. | 80 °C |
| Suitable for die cutting | yes |
Properties / Performance Values
| Elongation at break | 175 % |
|---|---|
| Chemical resistance | very good |
| Tensile strength cm2 | 40 N/cm² |
| Temperature resistance min. | -80 °C |
| Water resistance | very good |
| Flame retardance | very good |
| Temperature resistance max. | 80 °C |
| Suitable for die cutting | yes |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
