Additional Info
Liner: PV07 transparent PET film (50μm; 72g/m2)
tesa® 66866
White double-sided tape
Product description
tesa® 66866 is a white double-sided tape consisting of a shock absorbing PE-foam backing equipped with a high shock & anti-repulsion adhesive.
tesa® 66866 features:
- White color
- Outstanding shock & push-out performance
- Excellent anti-repulsion property to prevent lifting issue
- Waterproof IPX8 to prevent water leakage
- Good rework-ability
Product details and specifications
Application Fields
- TP mounting and back cover mounting in consumer electronics devices such like: smart phone, tablet, smart watch, TV, home appliance etc.
Product Construction
| Backing material | PE foam |
|---|---|
| Color | white |
| Total thickness | 300 µm |
| Type of adhesive | tackified acrylic |
| Type of liner | PET film |
Product Construction
| Backing material | PE foam |
|---|---|
| Color | white |
| Total thickness | 300 µm |
| Type of adhesive | tackified acrylic |
| Type of liner | PET film |
Properties / Performance Values
| Elongation at break | 270 % |
|---|---|
| Tensile strength | 16 N/cm |
| Ageing resistance (UV) | good |
| Static shear resistance at 23°C | good |
| Humidity resistance | good |
| Static shear resistance at 40°C | good |
Properties / Performance Values
| Elongation at break | 270 % |
|---|---|
| Tensile strength | 16 N/cm |
| Ageing resistance (UV) | good |
| Static shear resistance at 23°C | good |
| Humidity resistance | good |
| Static shear resistance at 40°C | good |
Adhesion to Values
| Adhesion to ABS (initial) | 10.5 N/cm |
|---|---|
| Adhesion to ABS (after 14 days) | 13 N/cm |
| Adhesion to Glass (initial) | 13 N/cm |
| Adhesion to Glass (after 14 days) | 15 N/cm |
| Adhesion to PC (initial) | 13 N/cm |
| Adhesion to PC (after 14 days) | 16.5 N/cm |
| Adhesion to PE (initial) | 5.5 N/cm |
| Adhesion to PE (after 14 days) | 6.1 N/cm |
| Adhesion to PMMA (initial) | 14 N/cm |
| Adhesion to PMMA (after 14 days) | 16.5 N/cm |
| Adhesion to Steel (initial) | 11.5 N/cm |
| Adhesion to Steel (after 14 days) | 14.5 N/cm |
Adhesion to Values
| Adhesion to ABS (initial) | 10.5 N/cm |
|---|---|
| Adhesion to ABS (after 14 days) | 13 N/cm |
| Adhesion to Glass (initial) | 13 N/cm |
| Adhesion to Glass (after 14 days) | 15 N/cm |
| Adhesion to PC (initial) | 13 N/cm |
| Adhesion to PC (after 14 days) | 16.5 N/cm |
| Adhesion to PE (initial) | 5.5 N/cm |
| Adhesion to PE (after 14 days) | 6.1 N/cm |
| Adhesion to PMMA (initial) | 14 N/cm |
| Adhesion to PMMA (after 14 days) | 16.5 N/cm |
| Adhesion to Steel (initial) | 11.5 N/cm |
| Adhesion to Steel (after 14 days) | 14.5 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
Contact us
