Additional Info
Liner variants:
PV0: brown glasine paper (71µm)
PV6: red MOPP film (80µm)
PV0: brown glasine paper (71µm)
PV6: red MOPP film (80µm)
tesa® 62708 PV0
Double-sided PE foam tape
Product description
tesa® 62708 is a double-sided tape consisting of a PE foam backing and a pure acrylic adhesive.
tesa® 62708 features especially:
- Excellent temperature resistance performance
- High ultimate adhesive strength for a secure bonding performance
- Conformable foam backing to compensate design tolerances or uneven surfaces
- Excellent converting properties
Product details and specifications
Application Fields
Permanent mounting of emblems and letters; e.g. single letters for classification of car model or engine data.
Product Construction
| Backing material | PE foam |
|---|---|
| Color | black |
| Total thickness | 800 µm |
| Type of adhesive | pure acrylic |
| Type of liner | MOPP |
Product Construction
| Backing material | PE foam |
|---|---|
| Color | black |
| Total thickness | 800 µm |
| Type of adhesive | pure acrylic |
| Type of liner | MOPP |
Properties / Performance Values
| Elongation at break | 440 % |
|---|---|
| Tensile strength | 18 N/cm |
| Static shear resistance at 40°C | very good |
| Static shear resistance at 70°C | very good |
| Temperature resistance long term | 100 °C |
| Temperature resistance short term | 120 °C |
Properties / Performance Values
| Elongation at break | 440 % |
|---|---|
| Tensile strength | 18 N/cm |
| Static shear resistance at 40°C | very good |
| Static shear resistance at 70°C | very good |
| Temperature resistance long term | 100 °C |
| Temperature resistance short term | 120 °C |
Adhesion to Values
| Adhesion to ABS (initial) | 5 N/cm |
|---|---|
| Adhesion to ABS (after 14 days) | 15 N/cm |
| Adhesion to Steel (initial) | 4 N/cm |
| Adhesion to Steel (after 14 days) | 15 N/cm |
| Adhesion to Steel (initial, 1 min) | 8 N/cm |
Adhesion to Values
| Adhesion to ABS (initial) | 5 N/cm |
|---|---|
| Adhesion to ABS (after 14 days) | 15 N/cm |
| Adhesion to Steel (initial) | 4 N/cm |
| Adhesion to Steel (after 14 days) | 15 N/cm |
| Adhesion to Steel (initial, 1 min) | 8 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
Contact us
