tesa® 61562
25µm transfer transparent barrier tape
Product description
tesa® 61562 is a transparent, thin transfer tape that ensures good encapsulation for oxygen and especially water vapour sensitive devices. This is realized by the specialty pressure sensitive adhesive (PSA). This special adhesive ensures very good device stability even at high temperature.
tesa® 61562 does not require curing and therefore enables fast processing.
Consequently it does not exhibit cure shrinkage and thus provides permanent adhesion between different device layers and good encapsulation for sensitive parts. The product enables the design of flexible devices.
tesa® 61562 features especially:
- High barrier against oxygen and water vapor
- High temperature stability
- Bubble-free performance at demanding test conditions
Product details and specifications
Application Fields
Encapsulation of sensitive organic and printed electronic devices
Suitable for designs which are exposed to high temperature and humidity
Suitable for designs which are exposed to high temperature and humidity
Product Construction
| Backing material | none |
|---|---|
| Color | transparent |
| Colour of liner | transparent |
| Thickness of liner (easy release) | 50 µm |
| Thickness of liner (tight release) | 50 µm |
| Total thickness | 25 µm |
| Type of adhesive | specialty |
| Type of liner | PET |
Product Construction
| Backing material | none |
|---|---|
| Color | transparent |
| Colour of liner | transparent |
| Thickness of liner (easy release) | 50 µm |
| Thickness of liner (tight release) | 50 µm |
| Total thickness | 25 µm |
| Type of adhesive | specialty |
| Type of liner | PET |
Properties / Performance Values
| WVTR (38°C, 90%RH) | 35 g/sqm*d |
|---|---|
| Haze < | 0.5 % |
| Refractive index | 1.52 |
| Transmittance (380 - 780nm) > | 99 % |
Properties / Performance Values
| WVTR (38°C, 90%RH) | 35 g/sqm*d |
|---|---|
| Haze < | 0.5 % |
| Refractive index | 1.52 |
| Transmittance (380 - 780nm) > | 99 % |
Adhesion to Values
| Adhesion to Glass (initial) | 4.5 N/cm |
|---|---|
| Adhesion to PC (initial) | 4.1 N/cm |
| Adhesion to PET (initial) | 2.9 N/cm |
| Adhesion to PMMA (initial) | 4.4 N/cm |
Adhesion to Values
| Adhesion to Glass (initial) | 4.5 N/cm |
|---|---|
| Adhesion to PC (initial) | 4.1 N/cm |
| Adhesion to PET (initial) | 2.9 N/cm |
| Adhesion to PMMA (initial) | 4.4 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
