Call us

tesa® 4318 PV2
High performance paper masking tape up to 160 °C
Product description
tesa® 4318 PV2 is a finely crêped, flexible paper masking tape, especially suitable for the high requirements of paintworks (water- or solvent based paints) followed by oven-drying.
1 / 8
2 / 8
3 / 8
4 / 8
5 / 8
6 / 8
7 / 8
8 / 8
Product Construction
Backing material | slightly-creped paper |
Type of adhesive | natural rubber |
Total thickness | 170 µm |
Properties / Performance Values
Elongation at break | 12 % |
Tensile strength | 47 N/cm |
Hand tearability | very good |
Temperature resistance | 160 °C |
Easy to remove | Yes |
Adhesion to Values
Adhesion to steel | 4 N/cm |
Additional Info
Paints and even critical filler systems adhere very well to the backing avoiding any kind of flaking.
tesa® 4318 PV2 can be removed from rubber, glass and paint without leaving adhesive residues.
tesa® 4318 PV2 can be removed from rubber, glass and paint without leaving adhesive residues.
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads