tesa® 61102
Product details and specifications
Product Construction
Backing material | EPDM rubber foam |
---|---|
Total thickness | 3200 µm |
Type of adhesive | acrylic |
Product Construction
Backing material | EPDM rubber foam |
---|---|
Total thickness | 3200 µm |
Type of adhesive | acrylic |
Properties / Performance Values
Elongation at break | 175 % |
---|---|
Tensile strength cm2 | 54 N/cm² |
Suitable for die cutting | yes |
Hardness - Shore 00 | 37 STK |
Flame retardance | very good |
Temperature resistance min. | -40 °C |
Temperature resistance max. | 105 °C |
Water resistance | very good |
Compression set | 7 % |
Properties / Performance Values
Elongation at break | 175 % |
---|---|
Tensile strength cm2 | 54 N/cm² |
Suitable for die cutting | yes |
Hardness - Shore 00 | 37 STK |
Flame retardance | very good |
Temperature resistance min. | -40 °C |
Temperature resistance max. | 105 °C |
Water resistance | very good |
Compression set | 7 % |
Adhesion to Values
Adhesion to steel | 12 N/cm |
---|
Adhesion to Values
Adhesion to steel | 12 N/cm |
---|
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
