tesa® 4308
Masking tape for high demanding masking applications
Product description
tesa® 4308 is a sligthly crêped paper masking tape which withstands temperatures up to 100°C. It can be used either with 2 component or water based paints. The backing avoids penetration or suffusing of lacquer or paint.
tesa® 4308 can be removed easily without any residues.
It always leaves clean paint results with sharp paint edges.
Product details and specifications
Application Fields
tesa® 4308 has been developed especially for high demanding masking applications in the CBR and transportation industry.
| Backing material | slightly-creped paper |
|---|---|
| Total thickness | 150 µm |
| Type of adhesive | natural rubber |
| Elongation at break | 12 % |
|---|---|
| Tensile strength | 47 N/cm |
| Hand tearability | very good |
| Sharp colour edge | very good |
| Conformability | good |
| Paint anchorage | very good |
| Temperature resistance (60 min) | 100 °C |
| Easy to remove | yes |
| Adhesion to steel | 4 N/cm |
|---|
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
Contact us
Product comparison
Last updated on 24 Aug 2026