tesa® 8851
Product details and specifications
Product Construction
| Adhesive Type | tackified acrylic |
|---|---|
| Backing material | ultra thin non-woven |
| Color | translucent |
| Color of liner | white/red logo |
| Thickness of liner | 71 µm |
| Total thickness | 30 µm |
| Weight of liner | 82 g/m² |
Product Construction
| Adhesive Type | tackified acrylic |
|---|---|
| Backing material | ultra thin non-woven |
| Color | translucent |
| Color of liner | white/red logo |
| Thickness of liner | 71 µm |
| Total thickness | 30 µm |
| Weight of liner | 82 g/m² |
Adhesion to Values
| Adhesion to ABS (initial) | 3.4 N/cm |
|---|---|
| Adhesion to ABS (after 14 days) | 4.6 N/cm |
| Adhesion to Aluminium (initial) | 3.5 N/cm |
| Adhesion to Aluminium (after 14 days) | 5.5 N/cm |
| Adhesion to PC (initial) | 3.7 N/cm |
| Adhesion to PC (after 14 days) | 5 N/cm |
| Adhesion to PET (initial) | 4 N/cm |
| Adhesion to PET (after 14 days) | 4.4 N/cm |
| Adhesion to PI (initial) | 4.3 N/cm |
| Adhesion to PI (after 14 days) | 4.4 N/cm |
| Adhesion to Steel (initial) | 4 N/cm |
| Adhesion to Steel (after 14 days) | 5.5 N/cm |
Adhesion to Values
| Adhesion to ABS (initial) | 3.4 N/cm |
|---|---|
| Adhesion to ABS (after 14 days) | 4.6 N/cm |
| Adhesion to Aluminium (initial) | 3.5 N/cm |
| Adhesion to Aluminium (after 14 days) | 5.5 N/cm |
| Adhesion to PC (initial) | 3.7 N/cm |
| Adhesion to PC (after 14 days) | 5 N/cm |
| Adhesion to PET (initial) | 4 N/cm |
| Adhesion to PET (after 14 days) | 4.4 N/cm |
| Adhesion to PI (initial) | 4.3 N/cm |
| Adhesion to PI (after 14 days) | 4.4 N/cm |
| Adhesion to Steel (initial) | 4 N/cm |
| Adhesion to Steel (after 14 days) | 5.5 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.
