tesa® 7950
Product details and specifications
Product Construction
| Adhesive Type | acrylic |
|---|---|
| Backing material | PET film |
| Color of liner | transparent |
| Liner Type | PET |
| Thickness of liner | 50 µm |
| Total thickness | 50 µm |
Properties / Performance Values
| Elongation at break | 60 % |
|---|---|
| Tensile strength | 36.7 N/cm |
| Temperature resistance short term | 130 °C |
| Temperature resistance long term | 60 °C |
| Optical density | 5.7 |
| Dielectric breakdown voltage | 4500 V |
Adhesion to Values
| Adhesion to ABS (initial) | 4 N/cm |
|---|---|
| Adhesion to ABS (after 14 days) | 5 N/cm |
| Adhesion to Aluminium (initial) | 4 N/cm |
| Adhesion to Aluminium (after 14 days) | 4.6 N/cm |
| Adhesion to Glass (initial) | 3.8 N/cm |
| Adhesion to Glass (after 14 days) | 4.7 N/cm |
| Adhesion to PC (initial) | 3.8 N/cm |
| Adhesion to PC (after 14 days) | 5 N/cm |
| Adhesion to Steel (initial) | 4 N/cm |
| Adhesion to Steel (after 14 days) | 4.6 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.