tesa® 69302
Product details and specifications
Product Construction
Adhesive Type | acrylic |
---|---|
Backing material | none |
Color | transparent |
Color of liner | transparent |
Liner Type | PET |
Thickness of easy release liner | 50 µm |
Thickness of tape | 50 µm |
Thickness of tight release liner | 75 µm |
Product Construction
Adhesive Type | acrylic |
---|---|
Backing material | none |
Color | transparent |
Color of liner | transparent |
Liner Type | PET |
Thickness of easy release liner | 50 µm |
Thickness of tape | 50 µm |
Thickness of tight release liner | 75 µm |
Properties / Performance Values
WVTR (38°C, 90%RH) | 1420 g/sqm*d |
---|---|
Haze | 0.5 % |
Ageing resistance (UV) | very good |
Refractive index | 1.47 |
Release of liner - outside | tight |
Gap filling | 40 % |
Transmittance (380 - 780nm) > | 99 % |
Release of liner - inside | easy |
Dielectric constant | 5.74 |
Humidity resistance | very good |
Properties / Performance Values
WVTR (38°C, 90%RH) | 1420 g/sqm*d |
---|---|
Haze | 0.5 % |
Ageing resistance (UV) | very good |
Refractive index | 1.47 |
Release of liner - outside | tight |
Gap filling | 40 % |
Transmittance (380 - 780nm) > | 99 % |
Release of liner - inside | easy |
Dielectric constant | 5.74 |
Humidity resistance | very good |
Adhesion to Values
Adhesion to Glass (initial) | 3 N/cm |
---|---|
Adhesion to Glass (after UV curing) | 10.8 N/cm |
Adhesion to PC (after UV curing) | 12.4 N/cm |
Adhesion to PET (after UV curing) | 4.8 N/cm |
Adhesion to PMMA (after UV curing) | 6.8 N/cm |
Adhesion to Polarizer (after UV curing) | 7.7 N/cm |
Adhesion to Values
Adhesion to Glass (initial) | 3 N/cm |
---|---|
Adhesion to Glass (after UV curing) | 10.8 N/cm |
Adhesion to PC (after UV curing) | 12.4 N/cm |
Adhesion to PET (after UV curing) | 4.8 N/cm |
Adhesion to PMMA (after UV curing) | 6.8 N/cm |
Adhesion to Polarizer (after UV curing) | 7.7 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
Download the files below for more technical details and information on this product.