Plaukų džiovintuvo laikiklis

Install a hairdryer holder on the wall! Easier than ever.

With a hairdryer holder, your hairdryer has a permanent place, is always at hand and does not have to be stored in a cabinet or drawer after each use. However, the assembly used to be complicated. Craftsmanship and the necessary tools were needed here. Valuable tiles or even pipes are quickly damaged by drilling. Stick your hairdryer holder to your wall with our tesa® Power.Kit technology according to your needs without drilling and remove it again without leaving any residue.

Drilling tiles in the rented apartment: what is allowed?

The law is clear when it comes to drilling holes in the landlord's property. As long as there are sufficient towel rails, shower rods, toilet paper holders and mirrors in the bathroom, it is forbidden to drill any more holes. In particular, it is not allowed to drill into tiles at all. Now if you want to attach a hairdryer holder to the wall, you better play it safe and attach it without drilling!

tesa® has the adhesive solution - attach hairdryer holder to the wall without drilling

tesa® Power.Kit technology is revolutionizing the way we renovate our bathrooms. Without any dust, noise, or damage to your bathroom, the hairdryer holder sticks to most materials, can be removed without leaving any residue, and can then be reattached.

The advantages of a hair dryer holder to stick on the wall

Here are the main advantages of the bathroom accessories using our tesa® Power.Kit technology:

• No drill holes in tiles or grout
• No fine dust pollution from drilling
• No risk of damaging water or electrical lines
• No noise disturbance for neighbors
• Extremely easy adhesive application thanks to the adapter
• Secure hold even in contact with water
• Residue-free removal

The right cleaning agent

Do not clean the substrate with the usual bath cleaning agents but use cleaning alcohol for this purpose.

How to attach your hair dryer holder to the wall

It is important that you take into account twelve hours of curing time. That's why we recommend starting the installation in the evening and continuing the next morning. In addition, each package of the tesa® Power.Kit technology series contains richly illustrated instructions.

1. Select the location where you want to attach your holder.
2. For the tesa® adhesive to stick to the tile, the surface must be free of dust, grease, lime, and other residues. Use a clean, soft cloth for basic cleaning. Please do not use non-stick cleaning agents or cleaners containing silicone, as these substances impair the adhesive effect. After basic cleaning, clean with rubbing alcohol. If a cleaning cloth is included with your accessory, please use it.
3. Remove the adapter ring from the package and remove the foil from the adhesive surface on the back.
4. Place the adapter ring in the desired location and press it firmly against the tile.
5. Now everything is ready and the tesa® Power.Kit technology can be used.
6. Open the applicator with the corresponding key and insert the opening into the larger hole in the adapter ring.
7. Using the key, press adhesive into the adapter until some adhesive comes out on the smaller opening of the adapter.
8. Now the back of the adapter is completely filled with adhesive and creates a secure bond with the tile surface.
9. At this point, you will need patience. The adhesive needs to cure for twelve hours. Do not touch the adapter during this time and in any case do not check the strength.
10. After the waiting time, simply place your holder on the adapter and tighten the screw with an Allen key.

 

From now on, the hairdryer holder is ready for use and fully loadable. If you want to reposition it at some point, you can remove the adhesive again without leaving any residue with a scraper or brush. Or you can use the adapter elsewhere with our bathroom accessories for gluing.

Maximum design freedom with our tesa® adhesive bathroom accessories

In the tesa® Power.Kit technology series, you will find the right adapter for every requirement that can be attached in the bathroom without drilling. Discover towel holders, shower squeegees, toilet paper holders as well as soap dispensers and numerous other products. Stick your dream bathroom with the hairdryer holders and other bathroom accessories from tesa®. No tools, no drilling, and no more ugly holes in walls and tiles. 

Tip: By the way, the adhesive solution from tesa® is also available for other rooms in the house.

Be inspired by the variety of designs and order your bathroom accessories from us without drilling!