Rankšluosčių laikikliai

The tesa® towel bar for gluing - say goodbye to drilled holes

A towel bar without drilling and other tesa® bathroom accessories allow you to set up your bathroom the way you want it. Because with tesa® Power.Kit technology, you can attach the various towel rails, hooks, or shower trays exactly where you need them. In the process, you damage neither the tiles nor the grout. Forget the fear of drilled pipes and cracked tiles. The innovative adhesive technology gives you maximum design freedom and can be removed effortlessly without leaving any residue.

Simply stick towel rails for bathrooms

Tenants in particular face a problem if the bathroom is not equipped as they would like. If the landlord has provided for basic fittings, he may forbid the tenants to drill further holes in tiles or joints. Even without an explicit prohibition, many a tenancy ends up in court because the landlord considers the number of drill holes to be unreasonable. Damages can be very expensive. Property owners face a similar dilemma. On the one hand, they want comfortable fittings for their bathroom, on the other hand, they are afraid of the damage to the tiles. Now there is a solution to these problems - towel bars and other bathroom accessories with tesa® Power.Kit technology.

The advantages of towel bars without drilling at a glance

• No drill holes required
• No drilling dust in the bathroom
• No cracked or chipped tiles
• No danger of drilling into water or electricity pipes
• Can also be stuck over pipes
• Can be removed without residue
• Adhesive adapter suitable for towel bar and other accessories
• Adapter and adhesive available separately

The tesa® towel bars for bathrooms adhere almost everywhere.

On clean and load-bearing surfaces, tesa® Power.Kit technology holds reliably and can be removed again without damage or residue if desired. The following table shows the possibilities of the substrates:

Step by step to the towel bar in the bathroom

Below you will find important information on how to stick your towel bar. In addition, each pack of the tesa® Power.Kit Technology Series contains richly illustrated instructions.

1. Select the place where you want to attach your new towel bar. 
2. For the tesa® adhesive to stick to the tile, the surface must be free of dust, grease, limescale and other residues. Use a clean, soft cloth for basic cleaning. Please do not use any non-stick cleaning agents or cleaners containing silicone, as these substances impair the adhesive effect. After basic cleaning, clean with rubbing alcohol. If a cleaning cloth is included with your accessory, please use it.
3. Take the adapter ring out of the package and remove the foil from the adhesive surface on the back.
4. Place the adapter ring in the desired position and press it firmly against the tile. 
5. Now everything is ready and the tesa® Power.Kit technology can be used.
6. Open the tube with the tube spanner and insert the opening into the larger hole in the adapter ring.
7. Press the adhesive into the adapter with the spanner until some adhesive comes out on the smaller opening of the adapter.
8. Now the back of the adapter is completely filled with glue and creates a secure connection with the tile surface.
9. At this point you need patience. The adhesive must cure for twelve hours. Do not touch the adapter during this time and do not check the strength under any circumstances.
10. After the waiting time, simply place your towel bar on the adapter and tighten the screw with an Allen key.

Done! Now your towel bar is ready for use and fully loadable.

Towel bars without drilling and other bathroom accessories from tesa®.

tesa® Power.Kit technology opens up unimagined possibilities in the bathroom and kitchen. Towel bars and other bathroom accessories made of high-quality stainless steel are available in various shapes and designs. So you are guaranteed to find the series that harmonises perfectly with your tiles, your fittings and your bathroom ceramics. You can equip the different adapters with different attachments. This means that you can simply continue to use the existing adapters if you want a towel hook and a hairdryer holder instead of the towel bar, for example. Even moving house is no problem. With the new adapters, which can be purchased later, you can simply take your tesa® bathroom accessories with you into your new home. Experience maximum freedom with tesa® Power.Kit technology and discover your favourite bathroom range now. Drilling is a thing of the past, today you can simply stick your bathroom accessories in place. The bath towel rail is just the beginning. With tesa® you can also stick toothbrush cup holders, hooks, shower head holders, or toilet paper holders wherever you like.