Mounting Mirror with Adhesive Tapes

Learn how to mount objects on smooth and solid surfaces such as tiles and metal in damp rooms like bathroom. Specially suitable for mirrors.

How to use tesa® Mounting Tape for Tiles & Metal surfaces

Mounting objects in hot and humid environments like bathrooms is a challenge – especially if you want to avoid all the noise, mess and hassle of drills and rawl plugs. That’s where this magic tape comes in. 

Not suitable for the following surfaces: silicon, stain resistant paints and PTFE.

Read more


Get your surfaces nice and clean

Many household detergents contain silicone, which is bad news for adhesives as it leaves a non-stick residue behind. So grab some silicone-free cleaner, rubbing alcohol or methylated spirit and a clean cloth – and get to work on that grease and grime. Your surface should be dry before you move on to the next step.



Applying the Mounting Tape

Cut lengths of tape from the roll and apply them vertically to the back of your object. Since the load will be greater at the top of the hanging area, use more tape here. It’s best to do it this way round rather than apply the tape to the tiles because it means you can then place the object precisely where you want it, and it also gives the tape a chance to bind to the rougher surface.



Apply pressure to secure the bond

Press or rub firmly along the back of each length of tape for at least 5 seconds.



Mount your item

Now all you have to do is remove the protective foil from each strip, align the object (it could be a mirror but of course it could be pretty much anything, like a soap dispenser, toothbrush holder or soap dish) and mount it on the wall. Take at least another 5 seconds to press down over the entirety of the object’s surface.