tesa® 69806 Optically Clear Adhesive
150µm outgassing resistant optically clear adhesive
제품 기능
- Excellent suppression of bubbles even in harsh environments
- Superb gap filling performance
- Good temperature, humidity and UV resistance
Product description
tesa® 69806 is a highly transparent transfer tape produced under controlled clean room conditions and designed for optically clear lamination with post UV curable design.
제품 세부 사항 및 사양
제품 기능
- Excellent suppression of bubbles even in harsh environments
- Superb gap filling performance
- Good temperature, humidity and UV resistance
- Very high bonding strength
- Smooth and easy liner removal
- High transmittance and low haze
Application Fields
- Designed for optically clear lamination of plastic substrates
- Lamination of films to rigid substrates of lamination of two rigid substrates
- Bonding of displays to cover glass or touch panel
- Automotive electronic displays using PC, PMMA
Product Construction
기재 소재 | 없음 |
---|---|
이형력 낮은 이형지 두께 | 50 µm |
이형력 높은 이형지 두께 | 100 µm |
이형지 색깔 | 투명성 |
이형지 종류 | PET필름 |
점착제 종류 | 아크릴 |
컬러 | 투명성 |
테이프 두께 | 150 µm |
Product Construction
기재 소재 | 없음 |
---|---|
이형력 낮은 이형지 두께 | 50 µm |
이형력 높은 이형지 두께 | 100 µm |
이형지 색깔 | 투명성 |
이형지 종류 | PET필름 |
점착제 종류 | 아크릴 |
컬러 | 투명성 |
테이프 두께 | 150 µm |
Properties / Performance Values
굴절율 | 1.48 |
---|---|
헤이즈 < | 0.3 % |
노후성 (UV) | good |
투과성(380 - 780nm) > | 99 % |
Tack | good |
내습성 | good |
Properties / Performance Values
굴절율 | 1.48 |
---|---|
헤이즈 < | 0.3 % |
노후성 (UV) | good |
투과성(380 - 780nm) > | 99 % |
Tack | good |
내습성 | good |
Adhesion to Values
유리점착력 (초기) | 11.9 N/cm |
---|---|
Glass점착력 (UV 경화 후) | 12 N/cm |
PC점착력 (초기) | 12.3 N/cm |
PC점착력 (UV 경화 후) | 10.3 N/cm |
PET점착력 (초기) | 8.4 N/cm |
PET점착력 (UV 경화 후) | 8.1 N/cm |
PMMA점착력 (초기) | 11.5 N/cm |
PMMA점착력 (UV 경화 후) | 9.3 N/cm |
Adhesion to Values
유리점착력 (초기) | 11.9 N/cm |
---|---|
Glass점착력 (UV 경화 후) | 12 N/cm |
PC점착력 (초기) | 12.3 N/cm |
PC점착력 (UV 경화 후) | 10.3 N/cm |
PET점착력 (초기) | 8.4 N/cm |
PET점착력 (UV 경화 후) | 8.1 N/cm |
PMMA점착력 (초기) | 11.5 N/cm |
PMMA점착력 (UV 경화 후) | 9.3 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
이 제품에 대한 자세한 기술 세부 정보와 정보를 얻으려면 아래 파일을 다운로드하십시오.
