tesa® 51217 PV1

마찰 소음 방지 및 마모방지용의 두꺼운 특수 슬라이딩 초고분자량 폴리에틸렌(PE-UHMW) 테이프


제품 기능
  • UV resistance assist the application in the visible area
  • Self-lubricating tape with very good sliding properties reduces wear and friction and prevents noise
  • High energy absorption capacity even at high stress Levels

Product description

tesa® 51217은 자외선 내성 및 내마모성을 갖춘, 두꺼운 고밀도 폴리에틸렌 테이프로서 점착력이 뛰어납니다. 자동차 업계에서 부품 보호, 부품 손질, 기계적 손상 방지와 소음 방지용으로 매우 적절합니다.

특성:

  • 투명하며 자외선에 강해 눈에 보이는 곳에 사용하기 좋음
  • 매우 잘 미끄러지는 자기 윤활 테이프로 마모나 마찰, 소음을 줄임
  • 심한 충격에도 에너지를 잘 흡수함


제품 세부 사항 및 사양

제품 기능

  • UV resistance assist the application in the visible area
  • Self-lubricating tape with very good sliding properties reduces wear and friction and prevents noise
  • High energy absorption capacity even at high stress Levels

Application Fields

tesa® 51217은 조립 라인에서 내부 마찰 소음 및 마모 방지용으로 설계된 제품으로 다음과 같은 역할을 합니다:
  • 모서리가 날카로운 금속판 부품의 마스킹

  • 자동차 지붕, 슬라이드 도어, 연약한 부품 슬라이딩

  • 부품 손질 등으로 인한 소음과 마모 방지


1 마찰이 심한 부분의 하네스 보호
  • 범퍼, B 필라, 휠 하우스 등 눈에 띄는 부분에 적용
기재 소재 PE
이형지 두께 71 µm
이형지 종류 글라신지
점착제 종류 순수 아크릴
총두께 154 µm
컬러 검정
연신률 350 %
인장강도 63 N/cm
내마모성 very good
Steel점착력 4.3 N/cm
Very good UV resistance: > 1000h WOM Florida test
The material can be supplied as die cuts in roll or sheets individually to customer specific dimensions under tesa® 54217 PV1.
tesa’s automation and application solution department provides customized equipment and self-designed application tools to enhance productivity.
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads

이 제품에 대한 자세한 기술 세부 정보와 정보를 얻으려면 아래 파일을 다운로드하십시오.

연락주세요!

연락처

메시지 보내주셔서 감사합니다.

최대한 빨리 연락드리겠습니다.

Something went wrong. Please try again later.

제품 비교

제품명 tesa® 51217 PV1 tesa® 54995 PV 0 tesa® 54994 tesa® 54190 Precision Die Cuts tesa® 51206 tesa® 54994 tesa® 54995 tesa® 51207 tesa® 54994 DC tesa® 50550 Glassguard DISCONTINUED tesa® 66330
총두께
154 µm
280 µm
360 µm
185 µm
114 µm
187
280
114 µm
72 µm
30 µm
점착제 종류
순수 아크릴
아크릴
아크릴
아크릴
순수 아크릴
아크릴
아크릴
순수 아크릴
아크릴
EVA
아크릴
기재 소재
PE
PU 필름
PU 필름
PVC필름
PE
PU 필름
PU 필름
PE
PU 필름
PP 필름
폴리이미드
마지막 업데이트 날짜 2024. 4. 16.