tesa® 51207

Special gliding PE-UHMW tape for anti-squeak prevention and abrasion protection

제품 기능

Transparency and UV resistance assist the application in the visible area
Self-lubricating tape with very good gliding properties reduces wear and friction and prevents noise
High energy absorption capacity even at high stress levels

Product description

tesa® 51207은 점착력이 우수한 얇은 UV 및 내마모성 고밀도 PE 테이프입니다. 이 제품은 소음 방지와 함께 부품, 트림 부품 및 하니스를 기계적 손상으로부터 보호하기 위해 자동차 산업에 최적화되어 있습니다.

제품 세부 사항 및 사양

제품 기능

Transparency and UV resistance assist the application in the visible area
Self-lubricating tape with very good gliding properties reduces wear and friction and prevents noise
High energy absorption capacity even at high stress levels

Application Fields

tesa® 51207 is especially designed for interior and exterior anti-squeak and abrasion protection at the assembly line to ensure a reliable:

Masking of sharp-edged sheet-metal components
Gliding of car roofs, slide doors, delicate components
Prevention of noise and wear, e.g. from trim parts
Protection of harnesses in high friction areas
Application in visible areas e.g. bumper, B-pillar, wheel house

기재 소재	PE
이형지 두께	71 µm
이형지 종류	글라신지
점착제 종류	순수 아크릴
총두께	114 µm
컬러	반투명

연신률	340 %
인장강도	53 N/cm
내마모성	very good

Steel점착력	4.3 N/cm

Very good UV resistance: > 1000h WOM Florida test The material can be supplied as die cuts in roll or sheets individually to customer specific dimensions under tesa® 54207 tesa’s automation and application solution department provides customized equipment and self-designed application tools to enhance productivity.

tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.

Downloads

이 제품에 대한 자세한 기술 세부 정보와 정보를 얻으려면 아래 파일을 다운로드하십시오.

Product information_tesa® 51207_ko-KR 70.9 kB

연락처

메시지 보내주셔서 감사합니다.

최대한 빨리 연락드리겠습니다.

Something went wrong. Please try again later.

제품명	tesa® 51207	tesa® 54995 PV 0	tesa® 54994	tesa® 51217 PV1	tesa® 54190 Precision Die Cuts	tesa® 51206	tesa® 54994	tesa® 54995	tesa® 54994 DC	tesa® 50550 Glassguard DISCONTINUED	tesa® 66330
총두께	114 µm	280 µm	360 µm	154 µm	185 µm	114 µm	187	280		72 µm	30 µm
점착제 종류	순수 아크릴	아크릴	아크릴	순수 아크릴	아크릴	순수 아크릴	아크릴	아크릴	아크릴	EVA	아크릴
기재 소재	PE	PU 필름	PU 필름	PE	PVC필름	PE	PU 필름	PU 필름	PU 필름	PP 필름	폴리이미드

마지막 업데이트 날짜 2024. 4. 16.

tesa® 51207

제품 세부 사항 및 사양

제품 기능

Application Fields

Additional Info

연락처

메시지 보내주셔서 감사합니다.