Bară Suport pentru Duș

Shower rods for gluing - Completely without drilling

• Easy to attach without drilling and remove without leaving any residue thanks to our tesa® Power.Kit technology.
• tesa bathroom accessories hold on most solid and load-bearing surfaces.
• Even if the products come into contact with water, there is still a high level of hold.
• Our products are rust-resistant and protected against oxidation due to the materials used.
• With all products you get the adhesive to match.

Easy installation of your shower rod with tesa® Power.Kit technology

A sturdy shower rod for your curtain will allow you to shower cleanly and safely. The installation of such a rod seems simple, but is usually associated with manual work such as drilling. So valuable tiles, or even pipes can be damaged. With our shower rods for gluing and the tesa® Power.Kit technology, you can attach your rod according to your own needs without drilling.

Drilling tiles in the rental apartment: what is allowed?

The law is clear when it comes to drilling holes in the landlord's property. As long as there are sufficient towel rails, shower rods, toilet paper holders and mirrors in the bathroom, it is forbidden to drill any more holes. In particular, it is not allowed to drill into tiles at all. If you now want to attach a new shower rod, good advice is needed. Better play it safe and fix your rod without drilling!

tesa® has the adhesive solution - attaching shower rods in the bathroom without drilling

tesa® Power.Kit technology is revolutionizing the way we renovate our bathrooms. Without any dust, noise, or damage to the wall, the shower rod sticks to most materials and can be removed without leaving any residue.

The advantages of a shower rod for gluing

Here you will find the most important advantages of the bathroom accessories of our tesa® Power.Kit technology:

• No drill holes in tiles and joints
• No fine dust pollution due to drilling
• No danger of damaging water or electrical lines
• No noise pollution for neighbors
• Easy application of the adhesive thanks to adapter
• Secure hold even when in contact with water
• Residue-free removal

The right cleaning agent

Do not clean the substrate with the usual bath cleaning agents but use cleaning alcohol for this purpose.

How to install your shower bar in your shower

It is important that you take into account twelve hours of curing time. That's why we recommend starting the installation in the evening and continuing the next morning. In addition, each package of the tesa® Power.Kit Technology Series contains richly illustrated instructions.

1. Select the place where you want to attach your new shower rod and clean the place as described above.
2. Take the adapter ring out of the package and remove the foil from the adhesive surface on the back.
3. Place the adapter ring in the desired location and press it firmly against the tile.
4. Now everything is ready and the tesa® Power.Kit technology can be used.
5. Open the applicator with the appropriate key and insert the opening into the larger hole in the adapter ring.
6. Using the key, press adhesive into the adapter until some adhesive comes out on the smaller opening of the adapter.
7. Now the back of the adapter is completely filled with adhesive and creates a secure bond with the tile surface.
8. At this point, you will need patience. The adhesive needs to cure for twelve hours. Do not touch the adapter during this time and definitely do not check the strength.
9. After the waiting period, simply place your shower rod on the adapter and tighten the screw with an Allen wrench. You can already enjoy your new bathroom accessory to the fullest!

From now on, the bar is ready for use and fully loadable. If you want to reposition it at some point, you can remove the adhesive again without leaving any residue with a scraper or brush. Or you can use the adapter elsewhere with our bathroom accessories for gluing.

Maximum design freedom with our tesa® adhesive bathroom accessories

In the tesa® Power.Kit technology series, you will find the right adapter for every requirement that can be attached in the bathroom without drilling. Discover towel rails, shower squeegees, toilet paper holders as well as soap dispensers and numerous other products. Stick your dream bathroom with shower rods and other bathroom accessories from tesa®. No tools, no drilling, and no more ugly holes in walls and tiles.
Tip: By the way, the adhesive solution from tesa® is also available for other rooms in the house.

Be inspired by the variety of designs and order your bathroom accessories from us without drilling!

Fixarea sigură fără găurire este posibilă - datorită tehnologiei inovatoare tesa® Power.Kit, fabricată în Germania. Adezivul nou de la tesa® este alcătuit din lipici impermeabil, ceea ce îl face alegerea perfectă pentru montarea oricărui lucru în medii umede, cum ar fi baia dvs.

Creați un spațiu confortabil pentru dvs. și împrospătați-vă baia cu accesoriile tesa® pentru baie!

Nu este necesară găurirea - uitaţi de timpul suplimentar pentru șuruburi și cuie și păstrați-vă gresia intactă. Economisiți costuri ridicate de remodelare a băii. Soluția adezivă oferită de tesa® garantează o fixare sigură și o experiență ușoară de montare și demontare.

Descoperiți o gamă impresionantă de seturi de accesorii pentru baie, căutați noi idei de design și obțineți o soluție inovatoare de montare adezivă, toate de la tesa®! Explorați marea noastră selecție de articole de baie, seturi de baie și accesorii pentru toaletă, precum și soluțiile noastre inteligente pentru depozitarea în băi.

Bucurați-vă de multitudinea accesoriilor pentru baie și de soluțiile de montaj de la tesa®.