tesa® 70465
650µm 흰색 양면 Bond & Detach
지속가능한 측면- solvent free coating
- 46% bio-based adhesive component
Product description
tesa® 70465는 점착면의 점착제를 쭉 늘려 제거(떼어짐)할 수 있는 양면 마운팅 테이프입니다.
tesa® 70465의 특성:
tesa® 70465의 특성:
- 두께: 650µm
- 매우 우수한 점착력
- 뛰어난 Push Out 특성 및 충격 흡수력
- 장기간 부착한 후에도 점착제를 쭉 늘려 쉽게 제거됨
지속가능한 측면
- solvent free coating
- 46% bio-based adhesive component
Application Fields
- 생산 프로세스에서 전자 기기의 부품을 임시 고정하는 용도
- 전자 기기에 부품을 영구적으로 마운팅 하는 용도로 쓰이며 수리나 재활용 시에는 부품 제거도 가능함
Product Construction
이형지 종류 | 글라신지 |
기재 소재 | 없음 |
점착제 종류 | 특수 |
총두께 | 650 µm |
컬러 | 흰색 |
이형지 두께 | 72 µm |
이형지 색깔 | 갈색 |
Properties / Performance Values
무용제 | 네 |
장기간 온도저항 | 60 °C |
단기간 온도저항 | 90 °C |
떼어냈을 때 잔여물이 남지 않는 | 네 |
정적 전단응력 (23°C) | very good |
정적 전단응력 (40°C) | very good |
14일 경과 제거성 (23℃) | very good |
Adhesion to Values
알루미늄점착력 (초기) | 18 N/cm |
알루미늄점착력 (14일 경과) | 18 N/cm |
Magnesium 면의 점착력 (초기) | 16 N/cm |
Magnesium 면의 점착력 (14일 경과) | 16 N/cm |
PE점착력 (초기) | 12 N/cm |
PE점착력 (14일 경과) | 12 N/cm |
Steel점착력 (초기) | 25 N/cm |
Steel점착력 (14일 경과) | 25 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads