tesa® 51410
100µm 양면 검은색 부직포 테이프
Product description
tesa® 51410은 부직포 기재와 검은색 변성 아크릴 점착제로 구성된 검은색 양면 점착 테이프입니다.
tesa® 51410의 특성:
- 다양한 피착제에 대한 강력한 점착력
- 뛰어난 충격 흡수력
- 매우 우수한 차광성
제품 세부 사항 및 사양
Application Fields
- 휴대폰 렌즈 마운팅
- 검은색 다이컷을 부착하여 빛을 차단하고 처리 용이성을 향상시키기 위한 용도
Product Construction
기재 소재 | 부직포 |
---|---|
이형지 두께 | 120 µm |
이형지 색깔 | 흰색 |
이형지 종류 | PE 코팅된 직물 |
점착제 종류 | 변성 아크릴 |
총두께 | 100 µm |
컬러 | 검정 |
Product Construction
기재 소재 | 부직포 |
---|---|
이형지 두께 | 120 µm |
이형지 색깔 | 흰색 |
이형지 종류 | PE 코팅된 직물 |
점착제 종류 | 변성 아크릴 |
총두께 | 100 µm |
컬러 | 검정 |
Properties / Performance Values
가소제 저항성 | medium |
---|---|
내화학성 | good |
내습성 | very good |
장기간 온도저항 | 80 °C |
Tack | good |
단기간 온도저항 | 140 °C |
노후성 (UV) | very good |
정적 전단응력 (23°C) | good |
Properties / Performance Values
가소제 저항성 | medium |
---|---|
내화학성 | good |
내습성 | very good |
장기간 온도저항 | 80 °C |
Tack | good |
단기간 온도저항 | 140 °C |
노후성 (UV) | very good |
정적 전단응력 (23°C) | good |
Adhesion to Values
ABS점착력 (초기) | 6.3 N/cm |
---|---|
ABS점착력 (14일 경과) | 8.6 N/cm |
유리점착력 (초기) | 7.2 N/cm |
유리점착력 (14일 경과) | 9.1 N/cm |
PC점착력 (초기) | 7.5 N/cm |
PC점착력 (14일 경과) | 9.8 N/cm |
PE점착력 (초기) | 3 N/cm |
PE점착력 (14일 경과) | 4.5 N/cm |
Steel점착력 (초기) | 7.7 N/cm |
Steel점착력 (14일 경과) | 10.1 N/cm |
Adhesion to Values
ABS점착력 (초기) | 6.3 N/cm |
---|---|
ABS점착력 (14일 경과) | 8.6 N/cm |
유리점착력 (초기) | 7.2 N/cm |
유리점착력 (14일 경과) | 9.1 N/cm |
PC점착력 (초기) | 7.5 N/cm |
PC점착력 (14일 경과) | 9.8 N/cm |
PE점착력 (초기) | 3 N/cm |
PE점착력 (14일 경과) | 4.5 N/cm |
Steel점착력 (초기) | 7.7 N/cm |
Steel점착력 (14일 경과) | 10.1 N/cm |
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
