tesa® 4621
제품 세부 사항 및 사양
Product Construction
| 기재 소재 | PE 사출된 직물 |
|---|---|
| 점착제 종류 | 아크릴 |
| 총두께 | 125 µm |
Product Construction
| 기재 소재 | PE 사출된 직물 |
|---|---|
| 점착제 종류 | 아크릴 |
| 총두께 | 125 µm |
Properties / Performance Values
| 연신률 | 22 % |
|---|---|
| 인장강도 | 54 N/cm |
| 풀림성 | 1.2 N/cm |
| 떼어냈을 때 잔여물이 남지 않는 | 네 |
| 떼어내기 쉬운 | 네 |
| 내열성 (30분) | 95 °C |
| 다이컷팅에 적합 | 네 |
| 쓰기 쉬운 | 네 |
| UV 저항력 | 8 weeks |
| Tack | very good |
| 곧게 자른 면 | good |
| 노후성 (UV) | very good |
| 메쉬 | 100 threads/inch² |
| 손으로 찢을 수 있는 | very good |
| Temperature resistance (removability from aluminum after 30 min exposure) | 95 °C |
| 내습성 | good |
| 내마모성 | medium |
Properties / Performance Values
| 연신률 | 22 % |
|---|---|
| 인장강도 | 54 N/cm |
| 풀림성 | 1.2 N/cm |
| 떼어냈을 때 잔여물이 남지 않는 | 네 |
| 떼어내기 쉬운 | 네 |
| 내열성 (30분) | 95 °C |
| 다이컷팅에 적합 | 네 |
| 쓰기 쉬운 | 네 |
| UV 저항력 | 8 weeks |
| Tack | very good |
| 곧게 자른 면 | good |
| 노후성 (UV) | very good |
| 메쉬 | 100 threads/inch² |
| 손으로 찢을 수 있는 | very good |
| Temperature resistance (removability from aluminum after 30 min exposure) | 95 °C |
| 내습성 | good |
| 내마모성 | medium |
Adhesion to Values
| 유리점착력 (초기) | 2.7 N/cm |
|---|---|
| PE점착력 (초기) | 1.1 N/cm |
| Steel점착력 | 2.6 N/cm |
Adhesion to Values
| 유리점착력 (초기) | 2.7 N/cm |
|---|---|
| PE점착력 (초기) | 1.1 N/cm |
| Steel점착력 | 2.6 N/cm |
Certificates
- none
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.