tesa® 4185
110 µm PVC 파인라인 테이프
제품 기능
- 인라인 도장 공정의 고온 저항성
- 가시적인 엣지 라인 애플리케이션을 위한 얇은 디자인
- 다차원 표면에 양호한 순응성
Product description
tesa® 4185 제품은 천연 고무 점착제가 있는 얇고 유연한 내온성 PVC 파인 라인 테이프이며 OEM 도장 공정 시 차체를 투톤으로 사용할 수 있도록 설계되었습니다. 110μm 두께로 차량 루프 프레임의 안쪽과 같이 눈에 보이는 부분에 미세하고 정교한 색 분할 라인을 제공하는 데 도움이 됩니다.
tesa® 4185 의 부드러운 PVC 백킹은 테이프를 좁은 모양이나 곡선에 적용할 수 있게 해줍니다. 160°C/1h의 내온성을 가진 tesa® 4185는 대부분의 온도에서도 완벽하게 견딜 수 있습니다.
효율적인 테이프 적용을 보장하기 위해 tesa® 4185용 표준화 및 맞춤형 어플리케이터를 사용할 수 있습니다.
특성:
- High temperature resistance for inline paint shop processes
- Thin design for visible edge line applications
- Good conformability with multidimensional surfaces
- Residue-free removal
- Applicators available for high application efficiency
제품 세부 사항 및 사양
제품 기능
- 인라인 도장 공정의 고온 저항성
- 가시적인 엣지 라인 애플리케이션을 위한 얇은 디자인
- 다차원 표면에 양호한 순응성
- 잔여물 없이 제거
- 높은 애플리케이션 효율성을 위해 어플리케이터 사용 가능
Application Fields
tesa® 4185 is suitable for various types of masking applications.
Example applications are:
To ensure the highest performance possible, our aim is to fully understand your application (including the substrates involved) in order to provide the right product recommendation.
Example applications are:
- Two-tone painting at high temperatures in automotive paint shops
- Masking for highly visible edge lines
- Masking for high oven drying temperatures
- Masking applications in narrow curves
To ensure the highest performance possible, our aim is to fully understand your application (including the substrates involved) in order to provide the right product recommendation.
Product Construction
기재 소재 | PVC필름 |
---|---|
점착제 종류 | 천연고무 |
총두께 | 100 µm |
Product Construction
기재 소재 | PVC필름 |
---|---|
점착제 종류 | 천연고무 |
총두께 | 100 µm |
Properties / Performance Values
연신률 | 200 % |
---|---|
인장강도 | 25 N/cm |
떼어내기 쉬운 | 네 |
손으로 찢을 수 있는 | very good |
다이컷팅에 적합 | 네 |
난연 | very good |
Properties / Performance Values
연신률 | 200 % |
---|---|
인장강도 | 25 N/cm |
떼어내기 쉬운 | 네 |
손으로 찢을 수 있는 | very good |
다이컷팅에 적합 | 네 |
난연 | very good |
Adhesion to Values
Steel점착력 | 3.1 N/cm |
---|
Adhesion to Values
Steel점착력 | 3.1 N/cm |
---|
tesa® products prove their impressive quality day in, day out in demanding conditions and are regularly subjected to strict controls. All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. They shall be considered as average values and are not appropriate for a specification. Therefore tesa SE can make no warranties, expressed or implied, including, but not limited to any implied warranty of merchantability or fitness for a particular purpose. The user is responsible for determining whether the tesa® product is fit for a particular purpose and suitable for the user’s method of application. If you are in any doubt, our technical staff will be glad to support you.
Downloads
이 제품에 대한 자세한 기술 세부 정보와 정보를 얻으려면 아래 파일을 다운로드하십시오.
